User`s guide

133
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session
Manager\Environment\ key "MS_SYS"
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session
Manager\Environment\ key "MS_SYS"
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Session
Manager\Environment\ key "MS_SYS"
sc\prog\exec from
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session
Manager\Environment\ key “Path”
sc\prog\exec from
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session
Manager\Environment\ key “Path”
sc\prog\exec from
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Control\Session
Manager\Environment\ key “Path”
Please note the following, when uninstalling MicroSCADA:
*
Wserver-process should be killed first. (only, if CAP 50x/SMS510 are not
installed)
*
Starting of Wserver should be removed also from the Startup folder. (only, if
CAP 50x/SMS510 are not installed)
*
Service should be uninstalled second. This should be done before deleting sc-
directory, because service can be uninstalled with the command "servinst -r".
(only, if CAP 50x/SMS510 are not installed)
*
MicroSCADA fonts from Exceed -directory should be removed too.
*
MicroSCADA user should be removed too. (only, if CAP 50x/SMS510 are
not installed)
In the directory HKEY_LOCAL_MACHINE\SOFTWARE\ABB the following
keys:
HKEY_LOCAL_MACHINE\SOFTWARE\ABB\PAK\SYS_500
HKEY_LOCAL_MACHINE\SOFTWARE\ABB\Products\SYS_500
HKEY_LOCAL_MACHINE\SOFTWARE\ABB\Products\Common\MS-
SBASE (this key only if CAP 50x/SMS510 are not installed)
3.6. Verifying SYS 600 startup
Follow this procedure when starting up the entire SYS 600 system:
MicroSCADA Pro
Installation and Administration Manual
SYS 600 9.2SYS 600 9.2
1MRS756115