User`s guide

131
This creates the line @BCK_PROC = "BCK_CREATE" in the SHADGLOBAL
command procedure.
10.Select File > Save again, and it asks you to create the following objects:
BCK_START:C
BCK_CREATE:C
BACKUP_1:T
BACKUP_2:T
BACKUP_3:T
3.5.15.3. Testing new configuration
A new configuration can be tested as follows:
*
Click the Backup button and check that the shadowing function is working
correctly.
*
Select Base system from the tool picture and check that the shadowing on
applications is sending and transmitting correctly.
*
Watch the Notify window in case there are some error messages.
*
If something has gone wrong and the shadowing does not stop, change the
shadowing state in the Basesystem Configuration Tool to "NONE" for both main
and backup application.
3.5.16. Uninstalling MicroSCADA
At the moment there is no uninstall program in MicroSCADA releases. The
following items have to be deleted when uninstalling MicroSCADA.
Please note that the control set numbering may vary in different
computers.
Delete the following:
1. \sc directory (and subdirectories)
2. Service (only, if CAP 50x/SMS510 are not installed into the same computer,
otherwise those products do not work)
(KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
\MicroSCADA)
(HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services
\MicroSCADA)
(HKEY_LOCAL_MACHINE\SYSTEM\ControlSet003\Services
\MicroSCADA)
Use uninstall program of the services, if possible
3. MicroSCADA group from start menu
4. Shortcut to MicroSCADA group on desktop
5. Following fonts from Windows font directory:
MicroSCADA Pro
Installation and Administration Manual
SYS 600 9.2SYS 600 9.2
1MRS756115