User`s guide

If Once a week is selected, the BACKUP_2 activates the start of backup, and if
Once a Day is selected then BACKUP_3 activates the start of backup.
As default, the time channels are started as shown in Table 3.5.15.1.-1. If there is a
need to change the time, it can be done with the Time Channel Tool, which is
opened from the application object navigator.
Table 3.5.15.1.-1 Backup time channels
BACKUP_1 First day every month at 00:10 (once a
month)
BACKUP_2 Every Friday at 18:01 (once a week)
BACKUP_3 Every day at 00:10 (once a day)
Backup Media:
It is possible to select where the application backup is created. When you select the
Tape, it will be the Windows Backup, which creates a backup of the backup
application to a tape.
If the Directory is selected, the backup application is copied in that directory. The
directory definition should be in the operating system format.
If Advanced is selected, it is possible to define a SCIL program, which creates the
backup.
A051198
Fig. 3.5.15.1.-1 Example of a advanced backup definition.
General:
When Backup has been started, this tool can follow the shadowing of the main
application to the backup application.
128
SYS 600 9.2SYS 600 9.2
MicroSCADA Pro
Installation and Administration Manual
1MRS756115