User`s guide

123
Table 3.5.12.-1 Parameters of the ms_serv.exe (Continued)
Parameter: Description:
The service start and stop access can be granted only for user-defined groups and
"Users" group.
The following groups are not granted access:
*
Power Users
*
Back-up Operators
*
Guests
*
Replicator
This is because the MicroSCADA monitor and notify window, can only be opened
by users belonging to the following groups:
*
Administrators
*
Users
3.5.13. Starting PC-NET
In the normal situation, the PC-NET process communication units need not to be
separately started but they are started automatically if the system configuration
contains NET nodes. In system startup, the PC-NET starting should be seen from the
notification window as described in Section 2.6.1.4. Verifying PC-NET process
communication unit.
The system configuration tool as shown in Fig. 3.5.13.-1 provides a possibility to
start and stop PC-NET instances during runtime. This feature is useful when the
system is under testing and the configuration changes has been done. In normal use
of a MicroSCADA Pro system, this function is not needed and PC-NET processes
are running without interruptions.
MicroSCADA Pro
Installation and Administration Manual
SYS 600 9.2SYS 600 9.2
1MRS756115