User`s guide

The possibilities are:
*
640 by 480 pixels
*
960 by 720 pixels
*
1280 by 960
*
1600 by 1200 pixels
Picture size is always 48x80. Semi graphic characters and the sizes of the fonts are:
*
8x10
*
12x15
*
16x20
*
20x25
VS Printer: This property is only used with VS Remote monitors. This printer is
used for Visual SCIL screen dumps and the output for the Visual SCIL object
VS_PRINT_OBJECT.
Example:
For example the printer LPT1 stands for the local printer using the LPT1:
parallel port connected to the MicroSCADA base system computer. You can
also give an UNC path to a printer shared on the network. The UNC path to
the printer shared as MYPRINTER on the computer MYCOMPUTER is: \
\MYCOMPUTER\MYPRINTER.
The MicroSCADA user must have appropriate rights to use the shared printer. The
printer defined must be a postscript printer
Opening a Predefined MicroSCADA monitor
To open a predefined MicroSCADA monitor:
1. Select In Use check box.
2. Insert the setting number and the name of the base system computer where the
monitors.dat file is. These definitions are described in Section 3.5.8.
Automatically opened MicroSCADA monitors
3. Click OK.
3.5.7. Automatic logon of SYS 600
Automatic startup means that MicroSCADA service is started directly after the
Windows has been started. No user needs to log in. In addition to automatic startup,
automatic logon into Windows can be used and MicroSCADA monitors can be
opened automatically.
To enable automatic logon:
116
SYS 600 9.2SYS 600 9.2
MicroSCADA Pro
Installation and Administration Manual
1MRS756115