User`s guide

6. Click OK.
7. The application defined in the configuration is started and MicroSCADA VS/X -
type monitors are opened to the defined workstations.
3.5.5. Defining automatic startup for SYS 600
Automatic startup means that MicroSCADA service is started directly after
Windows has been started. No user needs to log in. In addition to automatic startup,
automatic logon into Windows can be used and MicroSCADA monitors can be
opened automatically.
To define the automatic startup:
1. Open the SYS 600 Control Panel.
2. Click Admin.
3. Click Service.
4. The dialog shown in Fig. 3.5.5.-1 is displayed on the screen.
5. Select the Automatic Startup type.
6. Click OK.
A051229
Fig. 3.5.5.-1 Automatic startup of MicroSCADA is chosen in this dialog
Disabled startup determines that MicroSCADA cannot be started. Disabled startup
is also chosen as described above.
3.5.6. Opening SYS 600 Monitor manually
To define a SYS 600 Monitor for manual opening:
1. Double click the SYS 600 Monitor icon.
2. Define the following:
*
Monitor Type
*
Application number
*
Application Monitor number
*
The size of picture
*
VS Printer - used only with VS Remote monitors
114
SYS 600 9.2SYS 600 9.2
MicroSCADA Pro
Installation and Administration Manual
1MRS756115