User`s guide

113
The command procedure started by APL_INIT_1 is normally programmed to
perform, for example, the following operations:
*
Reading process object values from the remote terminal units and updating them
in the process database (the primary memory).
*
Completing and modifying the equipment/line configuration. The command
procedure started by APL_INIT_2 can, for example, be programmed to send
messages to printers.
3.5.4. Manual startup of SYS 600 Monitor
Manual startup means that MicroSCADA is started manually, from the
MicroSCADA Control Panel. If the base system has not been configured for
automatic startup, start the MicroSCADA manually.
To start:
1. Log into the operating system as a user belonging to the Administrator group.
2. Double-click the MicroSCADA Control Panel icon.
3. The MicroSCADA Control Panel is displayed as shown in Fig. 2.1.5.-2.
A051222
Fig. 3.5.4.-1 MicroSCADA Control Panel
4. Click Start.
5. The dialog box is displayed as shown in Fig. 3.5.4.-2.
A051223
Fig. 3.5.4.-2 This dialog box tells that MicroSCADA has been started
MicroSCADA Pro
Installation and Administration Manual
SYS 600 9.2SYS 600 9.2
1MRS756115