User`s guide

Table 3.4.1.-3 Options menu command
Toolbar Visible This option toggles the toolbar state.
Table 3.4.1.-4 Help menu command
About This command opens the About information sheet.
Toolbar
Corresponds to the Save command in the File menu.
Corresponds to the View log command in the File menu.
Corresponds to the Clear log command in the File menu.
Corresponds to the Run now command in the File menu.
3.4.1.1. Activating automatic disk space settings
The following activation methods are supported by the Disk Management Tool
(DMT):
*
The time-based activation (daily, weekly or monthly)
*
The activation based on LIB 500 disk space alarm
These options are independent of each other, but only one instance of the Execution
part may run at a time. Therefore, if the Execution part was triggered by the disk
space alarm or manually, and has not finished before the time-based activation has
occurred, then the time-based activation is ignored.
1. Setting a daily, weekly or monthly activation in the main dialog
2. Select the Activation schedule check box in order to activate the option buttons.
See
3. Select on of the following options, Daily at, Weekly at or Monthly at, depending
on which kind of activation is preferred.
Type the time of the day for the activation in the freely editable text box next to the
option button. The time must be typed in 24 hour format, for example 16:30. For the
Daily at activation, in addition to the time of the day, also the day of the week has to
be selected from the drop-down list next to the time text box. For the Monthly at
activation, in addition to the time of the day, also the date has to be selected from the
spin box next to the time text box.
The monthly activation will be ignored on months, which do not contain the
selected day. For example, the Execution part will not be activated on February, if
the 30th day is selected.
Setting activation on disk space alarm is done by selecting the Activate on disk
space alarm check box. The disk space alarm limit can be adjusted with the LI
attribute of the process object 10 in the B_HDS process object group, see the
Application Objects manual for more detailed information on adjusting the attribute.
106
SYS 600 9.2SYS 600 9.2
MicroSCADA Pro
Installation and Administration Manual
1MRS756115