MicroSCADA Pro SYS 600 9.
1MRS756115 MicroSCADA Pro Issued: 30.10.2007 Version: B/30.10.2007 Installation and Administration Manual SYS 600 9.2 Contents Copyrights ................................................................................. 7 1. Introduction..............................................................9 1.1. 1.2. 1.3. 1.4. 1.5. 1.6. This manual.............................................................. 9 Use of symbols ......................................................... 9 Intended audience ......
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 2.5.1. Installation of “Program Neighborhood”-Client... 2.5.2. Adding a new Application Set ....................... 2.6. Installing process communication units ........................ 2.6.1. PC-NET process communication unit .............. 2.6.1.1. Installing multiport serial card .......... 2.6.1.2. Installing LON cards ...................... 2.6.1.3. Installing network cards .................. 2.6.1.4.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 3.3.7. 3.3.8. 3.4. 3.5. 3.6. 3.7. Deleting Selected Content ............................102 Transferring information between two SCIL Database Tools ..........................................103 Hard disk management............................................103 3.4.1. Using Disk Management tool ........................104 3.4.1.1. Activating automatic disk space settings.......................................106 3.4.1.2.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 4.2. 4.3. 4.4. 4.5. 4.6. 4.1.7. Upgrading from revision 8.2..........................146 4.1.8. Upgrading from revision 8.1..........................146 LIB 5xx .................................................................147 Monitor Pro............................................................148 4.3.1. Common applications with LIB 5xx ................148 Communication units ...........................................
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual Copyrights The information in this document is subject to change without notice and should not be construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for any errors that may appear in this document.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 1. Introduction 1.1. This manual This manual provides thorough information on the SYS 600 software and hardware installation: base systems, LAN connections, process communication systems, workplaces and peripherals. 1.2.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual 1.4. Product documentation Name of the document Document ID SYS 600 Connecting LONWORKS Devices 1MRS756154 SYS 600 IEC 61850 System Design 1MRS756119 SYS 600 Status Codes 1MRS756178 SYS 600 System Configuration 1MRS756112 SYS 600 System Objects 1MRS756177 SYS 600 OPC Server 1MRS756174 LIB 500 *4.2. Operation Manual 1MRS755359 LIB 500 *4.2.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual * * The Start menu name always refers to the Start menu on the Windows Task Bar. System prompts/messages and user responses/input are shown in the Courier font. For example, if you enter a value out of range, the following message is displayed: Entered value is not valid. You may be told to enter the string MIF349 in a field. The string is shown as follows in the procedure: MIF349 * 1.6.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 2. Installation 2.1. Installing system servers 2.1.1. Hardware requirements The MicroSCADA Pro base system sets the following minimum configuration requirements. Follow Microsoft’s recommendations for supported operating systems, Windows XP, Windows 2000, Windows Server 2003 as shown in the Table below. Table 2.1.1.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual 2.1.2. Software requirements The MicroSCADA Pro system supports the following operating systems: * * * * Microsoft Windows 2000 Professional Windows 2000 Server Microsoft Windows XP Professional or Microsoft Server 2003 Standard Edition. Other server versions might be compatible with MicroSCADA; however those are not supported by this software. For more information about operating systems, refer to Microsoft documentation.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual * * 2.1.4. Modify the base system configuration files to match the actual configuration. Perform administrative tasks: define the startup type, change passwords, share resources, and so on. Installing SYS 600 The MicroSCADA Pro installation package contains an installation program, which creates the directory structure and copies the required files to your hard disk.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 1. Restart the computer to remove possible memory resident data. 2. Logon as a user with administrator rights. 3. Double-click the installation icon to start the installation. It is recommended to install using Add/Remove Programs from the Control Panel. 4. In the Product Installation dialog the software packages are listed, see Fig. 2.1.4.-2.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual MicroSCADA Pro must be installed on a disk drive physically located in the base system computer. It cannot be installed on a logical disk drive, for example a network drive. 6. After selecting the components to be installed, click Start. If a previous installation of the selected software package is detected, a System Information dialog is shown. 7.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual A060262 Fig. 2.1.4.-4 COM 500i COM 500i also handles the situation, when an existing COM 500 product is upgraded to SYS 600 9.2 or newer version. Installing Microsoft Message Queuing (MSMQ) Microsoft Message Queuing (MSMQ) is installed during SYS 600 installation and the following installation steps are required if MSMQ is not already installed as part of operating system installation.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual To install in Terminal Services environment After program installation, edit MMC500_TS.cmd to match installation drive, then run the command file. In a multi user environment like Terminal Server, Dynamic Link Libraries (the .DLL files) may fail to open if more than one user attempts to use them. The REGISTER utility allows you to tell the system that a particular .
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A051222 Fig. 2.1.5.-2 MicroSCADA Control Panel SYS 600 Notify The revision information and all the possible error messages that occur during the start-up and operation of SYS 600 are shown in the Fig. 2.1.5.-3. A070509 Fig. 2.1.5.-3 SYS 600 Notification Window SYS 600 Monitor Pro When an operator wants to supervise an application on a monitor screen of type VS or X, the operator opens a MicroSCADA Pro monitor.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070510 Fig. 2.1.5.-4 Monitor Pro Startup Window SYS 600 Monitor When an operator wants to supervise an application on a monitor screen of type VS or X, the operator opens a SYS 600 Monitor with the MicroSCADA Monitor dialog. A051226 Fig. 2.1.5.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070511 Fig. 2.1.5.-6 External OPC DA Client The shortcut menu for External OPC DA Client Control Panel provides a link to External OPC DA tools. Documentation This icon links to Status Codes and Operation Manual. 61850 OPC Server This icon links to Communication Engineering (CET) tool. A070512 Fig. 2.1.5.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 1. Open the MicroSCADA Control Panel by double-clicking the icon. A070513 Fig. 2.1.5.-8 Control MicroSCADA Applications dialog 2. Click Admin. 3. Click Applications to open the Control MicroSCADA Applications dialog. In this dialog, it is possible to view, add, prepare and remove the applications. Adding applications To add a new application: 1.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual 2. Type the name of the application to be created. 3. Click OK. The new application directory and its subdirectories are created under the \sc\apl directory. The initialization and startup pictures and dialogs are copied into the pict subdirectory of the new application. Preparing applications When preparing an application, the necessary startup and initialization files are copied to the application directory.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 2.2. Local Area Network (LAN) A local area network (LAN) is a group of computers and associated devices that share a common communications line or wireless link. Local area networks are built with hardware such as Ethernet cables, network adapters, hubs and managed or unmanaged switches. Wireless LAN and other more advanced LAN hardware options also exist.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual 2.2.3. Host names During Windows installation: 1. Type the computer name for the NETBIOS protocol so that the computer is recognized on the LAN. The computer's name is not the same as the host name used by TCP/IP. The host name is given during the TCP/IP protocol configuration. 2. Read the computer's host name and IP address by typing: ipconfig /all in a Command Prompt window.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual SA = 232) #CREATE NOD32:B = %NOD #CREATE NOD:V = LIST(LI = 1,NN = "System2",DI = 10,DT = 30,SA = 230) #CREATE NOD30:B = %NOD 2.2.5. ;Node for LAN frontend or SYS Verifying the LAN communication Use the ping utility to test the connectivity on the LAN and determine if a host is available and active. The syntax is: ping host where 'host' is the computer's IP address or node name on the network.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A050195 Fig. 2.3.1.-1 Principles of Terminal Server based computing Server-based computing With server-based computing it is possible to deploy, manage, support and execute applications completely on a server. The client devices, whether “fat or thin”, have instant access to it without application rewrites or downloads. Components of server-based computing Server-based computing relies on three critical components: 1.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual Administration Tools: In addition to all the familiar Windows Server administration tools, Terminal Server adds the Terminal Server License Manager, Terminal Server Client Creator, Terminal Server Client Connection Configuration and Terminal Server Administration tools for managing the client sessions.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual A Terminal Server Client can be used on a client PC to access a Terminal Server using the TCP/IP protocol from a network or by connecting via a Remote Access Service (RAS) connection. The minimum requirements for the 32-bit Terminal Server Client are: * * * * * Personal computer with an x86 compatible processor, Pentium or higher. The Client is available on any Windows operating system.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual During the installation of the Terminal Server Licensing service, you need to choose between the following modes of the license server: * * Your entire enterprise (enterprise license server) Your domain or workgroup (domain/workgroup license server) Normally, your domain or workgroup is used. In this scenario, a license server is automatically discovered by any terminal server within the same subnet as the license server.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual * * * Internet (Automatic): The quickest and easiest way to activate and install licenses, which is also recommended by Microsoft. This method requires Internet connectivity from the device running the Terminal Server Licensing admin tool. Internet connectivity is not required from the license server itself. The internet method uses TCP/IP (TCP port 443) to connect directly to the Clearinghouse.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A050088 Fig. 2.3.4.-1 Subcomponents of Terminal Services dialog 5. The next dialog informs you to install Terminal Services to run in one of the two modes: * Remote Administration or * Application Server. The Application mode is required. This also requires the Terminal Services Licensing service to be installed. A Terminal Services Client Access License is also required for non-Windows 2000 Professional clients. 6.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual A070708 Fig. 2.3.4.-2 Installing Terminal Services Terminal Server Licensing is a required component that licenses clients on a terminal server. You must install Terminal Server Licensing or your terminal server will stop accepting connections from unlicensed clients 120 days from the date of the first client logon.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 5. On the Select Users dialog box, click Locations to specify the search location. 6. Click Object Types to specify the types of objects you want to search for. 7. Type the name you want to add in the Enter the object names to select (examples): box. 8. Click Check Names. 9. When the name is located, click OK.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual The Client Creator can be used to create disks for installing the client software on a user's computer. You can use these disks to distribute the appropriate Terminal Services Client to each user. One of the directories created in Terminal Services installation is WINNT\system32 \clients\tsclient. By sharing this directory as read-only, you can install the Terminal Server Client over the network without using discs.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual * * * * Display Local Resources Programs to run on connection Other Experience settings See Fig. 2.3.6.-2 A070515 Fig. 2.3.6.-2 Remote Desktop Connection Display 2.4. Citrix MetaFrame Application Server 2.4.1. Introduction MetaFrame Application Server for Windows is Citrix's thin client/server system software for Microsoft's Windows Terminal Server.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual 2.4.2. System requirements * * * * * Microsoft Windows 2000 Server and Service Pack 4.0 (or later) or Microsoft Windows Server 2003 and Windows Server 2003 SP1 Microsoft NET Framework version 1.1 Java Runtime Enviroment (JRE) version 1.4.1_02 (or later) ASP.NET (Microsoft component) 2.4.3. Installing Citrix MetaFrame Presentation Server 4.0 system 2.4.3.1.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070517 Fig. 2.4.3.1.-2 Application Server dialog 4. Click OK in the Application Server dialog and click Next in the Windows Components Wizard. 5. Click Finish. 2.4.3.2. Get Citrix license file from internet 1. Go to http://mycitrix.com. The Citrix Login page is displayed. A070518 Fig. 2.4.3.2.-1 2. 3. 4. 5. Citrix Login Window Type Login ID, Password and click Login. Click Licensing.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 2.4.3.3. Installation and configuration of MetaFrame Access Suite licensing 1. Install Citrix Presentation server CD in a SYS 600 PC. A070519 Fig. 2.4.3.3.-1 Citrix MetaFrame Presentation Server setup 2. Select Product installations and updates. Then select Install MetaFrame Access Suite licensing, click Accept and next select Prerequisites Installation and click Next. A070520 Fig. 2.4.3.3.-2 3. Click Next.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070521 Fig. 2.4.3.3.-3 Component selection 4. Click Next.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070522 Fig. 2.4.3.3.-4 Citrix MetaFrame Access Suite licensing setup 5. Click Next and then accept Destination Folder by clicking Next. Accept the selected features and click Next.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070523 Fig. 2.4.3.3.-5 License files location 6. In the License Files Location, copy your license file in SYS 600 to c:\Program Files\Citrix\Licensing\MyFiles\ A070524 Fig. 2.4.3.3.-6 Web Server selection 7. Select Next. A070525 Fig. 2.4.3.3.-7 Restart server dialog 8. Click Next and then Finish.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 2.4.3.4. Install MetaFrame Presentation Server 4.0 and its components 1. Click Install MetaFrame Presentation Server 4.0 and its components as shown in the figure below. A070526 Fig. 2.4.3.4.-1 MetaFrame Presentation Server and components installation dialog 2. Accept the license agreement and continue. A070527 Fig. 2.4.3.4.-2 License agreement A070528 Fig. 2.4.3.4.-3 3. Click Next.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070529 Fig. 2.4.3.4.-4 Warning dialog 4. Follow the Components Setup messages. In most cases there is no need change default setup. 5. The following is an example setting when joining a Farm. A070530 Fig. 2.4.3.4.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070531 Fig. 2.4.3.4.-6 Create Server farm window 6. Click Next. A070532 Fig. 2.4.3.4.-7 7. Click Next.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070533 Fig. 2.4.3.4.-8 Licensing settings 8. Click Next. A070534 Fig. 2.4.3.4.-9 Configuring Citrix XML Service Port The installation summary is displayed at the end.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070535 Fig. 2.4.3.4.-10 Installation summary window Citrix will set Only Launch Published Applications selection on both connection types, ICA and RDP. Installing Citrix MetaFrame affects also Terminal Services RDP! You have to deselect Only Launch Published Applications. To do so: 1. Go to All Programs -> Citrix -> Administration Tools -> Citrix Connection Configuration Tool A070536 Fig. 2.4.3.4.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070537 Fig. 2.4.3.4.-12 Citrix Connection Configuration 3. Deselect Only Launch Published Applications. Do the same procedure for icatcp also. A070538 Fig. 2.4.3.4.-13 2.4.4. Advanced connection settings Publishing applications It is MetaFrame Presentation Server's integral function to make applications and their content available to users.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 1. Open the Presentation Server console. A070720 Fig. 2.4.4.-1 Launching Presentation Server console A070721 Fig. 2.4.4.-2 Authentication window 2. Click Cancel. A070722 Fig. 2.4.4.-3 Logon window 3. Enter Password and click OK.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070723 Fig. 2.4.4.-4 Selecting applications 4. Select Applications. A070724 Fig. 2.4.4.-5 Selecting published applications 5. Select Actions > New > Publish Application. A070725 Fig. 2.4.4.-6 Publishing wizard 6. Define the display name and application description and click Next.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070726 Fig. 2.4.4.-7 Selecting application dialog 7. Browse to “FrameWindow.exe” A070727 Fig. 2.4.4.-8 8. Click Next.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070728 Fig. 2.4.4.-9 Program neighborhood settings 9. Click Next. A070729 Fig. 2.4.4.-10 Application appearance 10.Click Next.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070730 Fig. 2.4.4.-11 Client requirements 11.Click Next. A070731 Fig. 2.4.4.-12 12.Click Next.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070732 Fig. 2.4.4.-13 Specifying servers 13.Add server and click Next. A070733 Fig. 2.4.4.-14 Specifying users 14.Click Finish and exit from the Management Console.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 2.5. 2.5.1. ICA Workstation Installation Installation of “Program Neighborhood”-Client 1. Install Citrix Presentation server CD (Components Disk ) to Workstation. A070715 Fig. 2.5.1.-1 Citrix MetaFrame Presentation Server Clients 2. Select MetaFrame Presentation Server Clients. 3. Select Install MetaFrame Presentation Server Client for Windows, next accept License Agreement and continue. A070716 Fig. 2.5.1.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070718 Fig. 2.5.1.-4 Using Local Name and Password 6. Click Next. A070719 Fig. 2.5.1.-5 Program Neighborhood Options 7. Click Next to begin installation. After successful installation, click Finish. 2.5.2. Adding a new Application Set A basic ICA client limits the connection type choices to just custom ICA connections.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070540 Fig. 2.5.2.-2 Find new application set 3. Click Next. 4. Type the name SCADA1, click Server Location, add address and click OK. A070541 Fig. 2.5.2.-3 New application set 5. Select the name of server from the drop-down list. Note that MicroSCADA Pro is running on SV_SER1.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070542 Fig. 2.5.2.-4 Locating 6. Click Next. A070543 Fig. 2.5.2.-5 Customizing settings 7. Click Next.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070544 Fig. 2.5.2.-6 Setup successful message 8. Click Finish. 9. Click Find New Application Set in the Citrix Program Neighborhood window. A070545 Fig. 2.5.2.-7 Citrix Program Neighborhood Window Logon settings of Application Set “SCADA1” User “valvomo” of SV_SER1 is a member of Remote desktop users.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070552 Fig. 2.5.2.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070549 Fig. 2.5.2.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070550 Fig. 2.5.2.-10 Default options When selecting Application Set “SCADA1” then following folder appears.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070551 Fig. 2.5.2.-11 FrameWindow MicroSCADA To open a FrameWindow MicroSCADA picture select “SER1 SYS600 Pro Monitor” 2.6. Installing process communication units 2.6.1. PC-NET process communication unit The PC-NET process communication unit is a Windows executable which is automatically installed when the SYS 600 packet is installed or upgraded.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual The multiport serial card is an extension card which is installed to a PCI slot in the motherboard of the PC. As to the installation procedure, refer to the installation manual of the product. In principle, any PCI based serial card can be used but following product lines and manufacturers are verified and widely used in MicroSCADA Pro systems: * * * RocketPort from Comtrol Corp.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 2.6.1.4. Verifying PC-NET process communication unit In order to verify the operation of the PC-NET process communication unit, the system configuration must contain at least one configured NET node. When MicroSCADA Pro system is started, following printout shown in Fig. 2.6.1.4.-1 is displayed in the notification window for each configured NET node. A070502 Fig. 2.6.1.4.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual configuration contains errors, the error printout can still be found from the notification window and the used status codes are the same as with the system configuration tool. The status codes are listed in a separate MicroSCADA Pro manual ‘Status Codes’. 2.6.2. IEC 61850 The IEC 61850 related process communication unit is an Windows executable, which has been automatically installed during the SYS 600 software installation.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual defined as “shared” in the computer's operating system configuration to which it is directly connected. Printers connected to a LAN can be made accessible to all base systems on the LAN.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual LP Lines per page, this should > = the number set on the printer QM Printer queue length OD Output destination: "PRINTER", "LOG" (disk files) or "BOTH" LD, LL, LF Printer log attributes, specially the management of log files. The attributes are meaningful, if OD = "LOG" or "BOTH" OJ Open on Job Basis, set value to 1. The printer is opened before each print job and closed when the job is completed 2.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual TT "LOCAL" ND The node number of the NET unit to which the printer is directly connected TN The device number of the printer in the NET unit to which it is directly connected DT "COLOR", "NORMAL", or "TRANSPARENT". Select "NORMAL", if the printer will be used exclusively for the black-and-white character-based printout. Select "COLOR" for all other types of picture-based printout.
1MRS756115 MicroSCADA Pro SYS 600 9.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual 4. 5. 6. 7. Close the tool, re-open it, and open the active configuration. Under Program/User_Defined you will find preconfigured file for printer. Edit it (remove semicolons) to fit your purpose. Stop the running MicroSCADA and re-start MicroSCADA. A070738 Fig. 2.7.1.3.-2 System configuration tool A070739 Fig. 2.7.1.3.-3 2.7.2.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual Alarm I/O cards Set parameters SYS:BAA to value representing the card type you use AA = 1;(if no AD is given then old Flytec card) AW = xx;(seconds between watchdog pulses) AD = "Nudaq PCI-7256"; supported Nudaq PCI-7256, Nudaq PCI-7250 or Advantech PCI1760 Watchdog output D25 pins 17 and 18 are open when program not running and closed when running.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual The instructions to configure the installed AOPCS can be found in the SYS 600 OPC Server manual.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 3. System administration 3.1. Transferring objects The following common functionality is provided by the Export/Import tool: * * * Recognizing of all the application objects from the selected MicroSCADA Pro application. Defining the common options for the exported and imported application objects. Exporting and importing application objects.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual * * Import, Export and Close buttons a tabbed page containing application objects to be handled At the lowest part of Export/Import Tool dialog, there is a status bar showing the number of processed application objects found and selected. 3.1.1. Opening and exiting Export/Import tool Application Object Import/Export Tool can be run as a standalone tool or as a Application Object Navigator's subtool.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A051193 Fig. 3.1.1.-2 Open the tool from the Object Navigator dialog When Application Object Export/Import Tool is started from the Object Navigator menu item by selecting Data > Import. See 3.1.1.-2. In this case, the tool is started on import mode, i.e. it can only be used for importing the application objects. When the import operation is finished, the selected Object Navigator view becomes updated.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A050155 Fig. 3.1.2.-1 Main dialog of Export/Import Tool During the export operation, the progress indicator displays the operation progress. See Fig. 3.1.2.-2. A050158 Fig. 3.1.2.-2 Export operation progress dialog At the end of the export operation, either the objects were successfully exported dialog is displayed or exceptions summary dialog is displayed. See Fig. 3.1.2.-3.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A050157 Fig. 3.1.2.-3 3.1.2.1. Objects are successfully exported Exporting formats The Export/Import tool supports three formats: * * * ASCII File Format (ASC) SCIL Database Format (SDB) Comma Separated Values Format (CSV) ASCII File Format (ASC) The ASC Export format is an outdated export format. The ASC format is not editable and data is saved in a slow sequential text file. The file name extension is . asc by default.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual The OI (Object Identifier) attribute of process objects can have a structure. If the structure exists and the OI Attribute Split check box is selected, the attribute's value is splitted according to the attribute's structure. * Attribute Name Header By default the first row of the CSV data represents the two letter attribute names, which you can select.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual To define CSV attributes: 1. In the CSV Attribute Tool dialog, select the object type from the Object Type drop-down list. If the pre-defined (IX) or user-defined (UP) process object type is selected, select the sub type from the Sub Type drop-down list. 2. In the Sub Type drop-down list, either select the common attributes or the process object type specific attributes. See Fig. 3.1.2.2.-2 3.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A050159 Fig. 3.1.2.2.-2 CSV Attribute Tool 5. Click the CSV Attribute File tab to change a CSV attribute file. Change the file by clicking Set File (the button with three dots). New attribute names can be loaded from the file by clicking the Load File button. See Fig. 3.1.2.2.-3.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A050161 Fig. 3.1.2.2.-3 3.1.2.3. CSV Attribute File tab Defining common options for exported data In addition to the application and object type definitions, it is possible to define other common options for the exported data. Define also the export type, available types are ASC file format, CSV (Comma Separated Values) and SDB (SCIL Database) formats.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A051194 Fig. 3.1.2.3.-1 Filter dialog The existing Filter Condition is applied by selecting the condition from the dropdown list or using the SCIL Search Condition dialog (the button with three dots). The tool stores the 30 latest Filter Conditions in the history list. The history list is read in the tool during its start-up.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual type, the new data is not appended, if the data already exists. When Read File is clicked, the source file defined by file name is read and the result is shown in the Application Objects tabbed page. The Save Datalog Values option can be toggled on/off, depending whether the user wants to store the datalog values during the import operation. Default value is off. 3.1.3.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A050163 Fig. 3.1.3.-1 Main dialog of Export/Import Tool During the import operation, the progress indicator displays the operation progress. See Fig. 3.1.3.-2. If the file cannot be read, an appropriate notification dialog is displayed for the user. A051195 Fig. 3.1.3.-2 Import operation progress dialog An exception can occur, when the tool imports application objects.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual Type Letter that identifies the object type Name Name of an object Exception Context of exception (create new or modify an existing object) Status SCIL status received from the system Conflicting Object The name of the object that causes the conflict A051196 Fig. 3.1.3.-3 Import Exceptions dialog Functions of the dialog: 3.1.3.1. Button Functions Save As... Opens the file chooser to specify the location for .
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual be created with their original names, but they are dummy. So, they should be modified afterwards to make process objects work properly. The Import Exceptions dialog informs about created objects. The Save Datalog Values option can be toggled on/off, depending whether the user wants to store the datalog values during the import operation. Default value is off.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A051529 Fig. 3.2.1.-1 Opening the Search Tool from Object Navigator. Fig. 3.2.1.-2 shows Search Tool, when the tool is started through the Object Navigator. Note that in case the Search string(s) field is empty it should be filled out before the search can be completed. A051530 Fig. 3.2.1.-2 View of the Search Tool started from Object Navigator. Close the Search Tool by clicking Close.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 3.2.2. Making searches After defining the search conditions, click Search to start the search. Search can also be started by pressing Enter. When a search starts, the tool initializes a search first by locating targets according to search conditions. At this stage the empty Progress Indicator dialog is displayed and the Searching text is shown on the status bar.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A051532 Fig. 3.2.2.-2 3.2.3. A completed ‘VSO files’ search with a failure Defining searches The search conditions are the input for a search. They consist of a search type, an application, target names and paths, search strings, overlapping strings to be excluded and two boolean options: Include subdirectories and match case. Search conditions are saved in the SEARCH.INI parameter file when the Search Tool is closed.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual * * * Pictures VSO files Text files When the Search Tool is opened, it displays the default search type, which depends on how the tool is started. If Search Tool is started through Object Navigator, the default search type is selected on Object Navigator. For example, if the VSO files object is selected on Object Navigator and Search Tool is opened. The default search type is VSO files in the Search type drop-down list.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual * * Select a file by browsing the directory. Add a file by clicking the Add file button. In the Select File dialog, select the appropriate file. The file name is the last in the Target names box and it is separated by the delimiter from the other file names. A directory name is added to the target paths box. Select objects or files in Object Navigator. The selected items are target names when Search Tool is started.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual Search strings The Search strings drop-down list can be edited. Its text box shows a string or strings to be searched. Different strings are separated by the delimiter to enable multiple searches. Earlier searched strings can be selected to the text box from the saved choices in the drop-down list. Match case If the Match case is selected, letters are case sensitive.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual BAU_ALARM2. PIC PF:TEMP2_BASE EXIT 1 4 store C:\SC\LIB4\base\BBONE\inst BGI_BASE.PIC MAIN PICTURE EXIT 1 4 store BGI_BASE2.PIC MAIN PICTURE EXIT 1 4 store EXIT 1 4 store C:\SC\LIB4\base\BBONE\use BGU_DBTLA.PIC PF:DBT_BASE C:\SC\LIB4\FMOD\MVPROCESS\Use FPU_BAY2A.PIC MAIN PICTURE . START_PROGRAM2 3 2 store FPU_C501V.PIC MAIN PICTURE .KEY_OK 22 11 store ...
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual If the Search Tool is started via the Object Navigator, double-clicking the selected hit result starts the corresponding editor or dialog and brings up the program, where the searched string was found (for ‘VSO files’ search only VS Dialog editor is started). If the tool is started as stand-alone, straight away editing is possible only for Text files searches. 3.3.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 3.3.1. Opening the SCIL Database File When File > Open is selected or the appropriate toolbar button is clicked, the File Chooser dialog is opened. See Fig. 3.3.1.-1. A051205 Fig. 3.3.1.-1 Selecting a file in File Chooser The default folder for File Chooser is the active application's PICT folder. The files, which have the .SDB extension are shown as default.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual In this case, the tool disables the saving function. This is because, the Text Translation Tool should be used for localization purposes of these files. However, it is possible to edit the contents of this file, and save it to another file name. When the file is opened in the tool, its contents is shown in the tree. Sections node of the tree displays the number of sections included in this file.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A051207 Fig. 3.3.1.-3 3.3.2. Data type icons Creating a New SCIL Database File When File > New is selected or the appropriate toolbar button is clicked , the contents of the SCIL Database file tree is cleared in the tool. If the current SCIL database file in the tool has been modified before creating a new file, the following dialog is displayed to the user. See Fig. 3.3.2.-1.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A051200 Fig. 3.3.2.-1 Current file is modified notification When Yes is clicked, the tool saves the current SCIL database file before clearing the contents of tree. If No is clicked, the contents of tree is cleared without saving the content of the current SCIL database file. If Cancel is clicked, the contents of tree is not cleared. 3.3.3.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 3.3.4. Editing Section Value When some section is selected in the tree, select Object > Edit from the menubar or . Then the Edit dialog is opened. See click the appropriate toolbar button Fig. 3.3.4.-1 A051202 Fig. 3.3.4.-1 Edit dialog Modify the contents of the existing value in the text field. When OK is clicked or ENTER is pressed, the modified value is applied into tool and Edit dialog is closed.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A051208 Fig. 3.3.5.-1 Save as dialog If an existing file has been modified in the tool, select File > Save from the menubar to save the file with the same name. or click the appropriate toolbar button 3.3.6. Renaming Sections Select some existing section in the tree, and select Object > Rename from the menu . Then the Rename dialog is opened. See or click the appropriate toolbar button Fig. 3.3.6.-1 A051204 Fig. 3.3.6.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 3.3.8. Transferring information between two SCIL Database Tools It is possible to copy and paste section and value information between two parallel SCIL Database Tools. The purpose of this function is to provide easier engineering, when there is a need to reuse the data from one SCIL Database File to another. This can be done by the following way: 1. 2. 3. 4. Start the first SCIL Database Tool from the Tool Manager.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 3.4.1. Using Disk Management tool The Disk Management Tool is accessed by double-clicking the Disk Management icon in the Miscellaneous tab of the Tool Manager. When the DMT User Interface part is started, the main dialog box appears. The typical appearance of the main dialog box is shown in 3.4.1.-1. A051549 Fig. 3.4.1.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual Menus Table 3.4.1.-1 File menu commands Save This command saves current activation settings and file sets to the parameter file. Base system objects are updated according to the new activation settings. The left toolbar button also corresponds to this command. View Log View logThis command opens the viewer dialog box to view the log created by the Execution part.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual Table 3.4.1.-3 Toolbar Visible Table 3.4.1.-4 About Options menu command This option toggles the toolbar state. Help menu command This command opens the About information sheet. Toolbar Corresponds to the Save command in the File menu. Corresponds to the View log command in the File menu. Corresponds to the Clear log command in the File menu. Corresponds to the Run now command in the File menu. 3.4.1.1.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual Changing B_HDS process object group also effects LIB 5xx since it uses the same group. If LIB 5xx is installed after adjusting the LI attribute, the LIB 5xx default value will replace the adjusted value. 3.4.1.2. Creating new file sets Each file set consists of the following attributes: Table 3.4.1.2.-1 File attributes Source path This is the directory specification, where source files are located.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual File sets are processed by the Execution part in the same order as they are listed in the UI main window. Two buttons, Move up and Move down, allow changing the order. 3.4.1.3. Deleting file sets File Sets can be deleted as follows: 1. Select the file set(s) to be deleted. Several file sets can be selected by holding down Ctrl and clicking on the sets to be selected.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual shown in Figure 11.2.2.-2 is displayed. The warning appears after the first file set that may include not supported files, has been approved, but only once every time the DMT is used. A051595 Fig. 3.4.1.4.-2 Warning about a file mask that may include files not supported by the DMT. 4. Select the appropriate Action for processing the files included in the file mask.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual The two navigation buttons in the File Set Properties dialog can be used to move between file sets in the main dialog. The left arrow moves to the previous file set in the list and the right arrow moves to the next one. If there are unsaved changes in the File Set Properties dialog, the tool asks whether to save them prior to moving.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A051597 Fig. 3.4.1.6.-1 The Execution Part dialog The Source file text box shows the name and the path of the currently open archive. The corresponding Browse button allows selecting another archive. The leftmost list contains IDs of compressed file sets in the first column. IDs are 4digit numbers assigned in the ascending order.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual 3.5. Starting SYS 600 3.5.1. Starting base systems To start a base system: 1. Switch on the computer and the display. 2. After the power has been switched on, the memory is tested and the operating system is started. 3. MicroSCADA can be started either manually or automatically, depending on the configurations made to the system. 4.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual The command procedure started by APL_INIT_1 is normally programmed to perform, for example, the following operations: * * 3.5.4. Reading process object values from the remote terminal units and updating them in the process database (the primary memory). Completing and modifying the equipment/line configuration. The command procedure started by APL_INIT_2 can, for example, be programmed to send messages to printers.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual 6. Click OK. 7. The application defined in the configuration is started and MicroSCADA VS/X type monitors are opened to the defined workstations. 3.5.5. Defining automatic startup for SYS 600 Automatic startup means that MicroSCADA service is started directly after Windows has been started. No user needs to log in.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A051226 Fig. 3.5.6.-1 Basic MicroSCADA Monitor (SYS 600 Monitor) Definitions 3. Click OK. The options available to define the monitor include: Monitor Type: Choose the monitor type you want to open from the following: * VS Local This is the local Visual SCIL monitor and requires no X emulation software. The MicroSCADA base system must be on the computer from where the MicroSCADA monitor is started.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual The possibilities are: * * * * 640 by 480 pixels 960 by 720 pixels 1280 by 960 1600 by 1200 pixels Picture size is always 48x80. Semi graphic characters and the sizes of the fonts are: * * * * 8x10 12x15 16x20 20x25 VS Printer: This property is only used with VS Remote monitors. This printer is used for Visual SCIL screen dumps and the output for the Visual SCIL object VS_PRINT_OBJECT.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 1. 2. 3. 4. Open the SYS 600 Control Panel. Click Admin. Click AutoLogon. The dialog shown in the Fig. 3.5.7.-1, is displayed on the screen. A051230 Fig. 3.5.7.-1 Automatic logon of SYS 600 Monitor 5. Type the user name and the password. 6. Select Automatic Logon Enabled. 7. Click OK. Using Automatic Logon might compromise the security of the MicroSCADA system.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual * * * semi-graphic font display print file To change the font, copy the desired font name of the MicroSCADA monitor type in question from the comment part of the file. When entering a print file name in the file, the name must end with a colon (:). 4. Save the file as an ASCII file. Monitors.dat The monitors.dat file is a text file with a specified format. The default monitors.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual [2] SCS_MON_TYPE=RVS SCS_MS_WINDOWS_APPLICATION=0 SCS_MS_WINDOWS_MONITOR=0 SCS_X_TERMINAL_FONT=-abb-scada-medium-r-normal–15-150-75-75-c-100-iso8859-1 DISPLAY=localhost:0 PRINTFILE=LPT1: [3] SCS_MON_TYPE=XMON SCS_X_TERMINAL_APPLICATION=0 SCS_X_TERMINAL_MONITOR=0 SCS_X_TERMINAL_FONT=-abb-scada-medium-r-normal–15-150-75-75-c-100-iso8859-1 DISPLAY=localhost:0 The first part of the file is composed of comments.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 3.5.10. Automatic opening at application startup A MicroSCADA monitor should be configured to be opened automatically at application startup if the MicroSCADA monitors are to be opened to an operator workstation but the Windows in the same computer is not logged into. To configure a MicroSCADA monitor to be opened automatically at the startup of an application: 1.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 1. Define a MicroSCADA monitor in the base system as described in Section 3.5.8. Automatically opened MicroSCADA monitors. 2. Copy a MicroSCADA Monitor program icon into the Startup folder of the user. 3. Change the target line (found by choosing the properties of the icon/program) by setting the following flags -d for the predefined monitor and -r for retries. See the example below.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual Table 3.5.11.-1 Parameters of the Mons Program (Continued) Parameter Description -serv_create_dir_disabled If this parameter is given, no directories are created during MicroSCADA service startup. This means that, for example, with current SYS 500 default installation, directories "Form" and "Pic" are not created under application directories. This parameter can only be used with "-start_serv" parameter.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual Table 3.5.12.-1 Parameter: Parameters of the ms_serv.exe (Continued) Description: The service start and stop access can be granted only for user-defined groups and "Users" group. The following groups are not granted access: * * * * Power Users Back-up Operators Guests Replicator This is because the MicroSCADA monitor and notify window, can only be opened by users belonging to the following groups: * * 3.5.13.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070504 Fig. 3.5.13.-1 System configuration tool When PC-NET process is running, on-line configuration changes can be done in online mode by selecting Configuration>Open On-line. In this mode, the background of the dialog is purple. A070505 Fig. 3.5.13.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual If the online mode does not show all NET nodes which are configured and saved, most probably the corresponding PC-NET process has not been started and the notification window (and “sys_error.log” file) contains related error messages. 3.5.14. Shutting down SYS 600 To stop MicroSCADA: 1. 2. 3. 4. Close all monitors. Open the MicroSCADA Control Panel. Click Stop. The dialog box shown in Fig. 3.5.14.-1 is displayed.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 3.5.15. Backup files With Backup Tool you can make an online backup of the MicroSCADA application. MicroSCADA is running while the backup is made. This tool makes a backup of the main application, not of the whole MicroSCADA. In other words, it makes a backup of everything located under \SC\APL\'main application name'. This means that you always need a second backup of \SC, if you change SYS_BASCON.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A051197 Fig. 3.5.15.-1 3.5.15.1. Main view of the Backup Tool Creating online backup This section provides information on how to use the backup function. Manual Backup: Click Backup in the Backup Tool window shown in Fig.3.5.15.-1, and after that click Yes. The procedure takes about 1 1/2 hour with a medium application with reporting.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual If Once a week is selected, the BACKUP_2 activates the start of backup, and if Once a Day is selected then BACKUP_3 activates the start of backup. As default, the time channels are started as shown in Table 3.5.15.1.-1. If there is a need to change the time, it can be done with the Time Channel Tool, which is opened from the application object navigator. Table 3.5.15.1.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual When the shadowing is ready, and the backup creation command has been executed, it shows the following message, "Shadowing is ready. Backup will be created by operating system". This means that this tool does not have any connection to the creation of the backup, which is normally made by the operating system tools like Windows Backup.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual * * Main and watchdog applications must be set to HOT state, and the backup application to COLD. Application mapping must be made in main, watchdog and backup applications.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual This creates the line @BCK_PROC = "BCK_CREATE" in the SHADGLOBAL command procedure. 10.Select File > Save again, and it asks you to create the following objects: BCK_START:C BCK_CREATE:C BACKUP_1:T BACKUP_2:T BACKUP_3:T 3.5.15.3. Testing new configuration A new configuration can be tested as follows: * * * * 3.5.16. Click the Backup button and check that the shadowing function is working correctly.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual scada0810.fon scada1215.fon scada1620.fon scada2025.fon scalo0810.fon scalo1215.fon scalo1620.fon scalo2025.fon abb10.fon abb14.fon abb18.fon 6. Package & Product information from registry: HKEY_LOCAL_MACHINE\SOFTWARE\ABB\PAK\SYS_600\.. KEY_LOCAL_MACHINE\SOFTWARE\ABB\Products\SYS_600\.. 7. Driver information from registry: HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\...
1MRS756115 MicroSCADA Pro SYS 600 9.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 1. If not already running, start the process units as described in their respective manuals. 2. Start the remote communication equipment, modems, etc. 3. Start the printers by switching the power on. 4. Switch on the workstations, so that MicroSCADA monitors can be opened automatically. 5. Start the base systems. If there are hot stand-by (redundant) base systems, start both the hot and stand-by base systems. 6.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A070497 Fig. 3.6.-2 Notification window More information of installed MicroSCADA software is available in .log files under sc\Setup directoryas shown in Fig. 3.6.-3. A070741 Fig. 3.6.-3 Revision info To verify the start of MicroSCADA SYS 600, MicroSCADA and SYS 600 Pro Monitor: 1. 2. 3. 4. 5. Open SYS 600 Control Panel. Click Start. Click OK in opened window. Double click MicroSCADA Icon.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070496 Fig. 3.6.-4 Tutor application logon dialog SYS 600 Monitor Pro To open Monitor Pro locally, double click the SYS 600 Monitor Pro Icon. The Monitor Pro Login window opens as shown in Fig. 3.6.-5 A070498 Fig. 3.6.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 3.7. SYS 600 Monitor Pro Remote Connection Pro remote connection means that MicroSCADA Pro monitor is not opened on the SYS but on a separate PC. To establish a connection between MicroSCADA base system and workstation on which the Pro type monitor is opened, the following steps are needed: To establish SYS 600 Monitor Pro remote connection: A070499 Fig. 3.7.-1 Computer management window 1.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A070506 Fig. 3.7.-2 Remote Desktop User Properties dialog Note: Before starting SYS 600, remember to edit and execute MMC500_TS.cmd which lies under \sc\prog\exec.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual A051183 Fig. 3.7.-3 Remote Desktop Connection General dialog On the client side: 1. Open Remote Desktop Connection from programs/Accessories/ Communications. 2. Select options like Display properties and programs that you want to start when connecting as shown in Fig. 3.7.-3 and Fig. 3.7.-4. 3. If Start a program is deselected a desktop is shown. Type the name of Computer then press Connect.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual A051186 Fig. 3.7.-4 Remote Desktop Connection Programs dialog SYS 600 Monitor Remote connection Terminal Services can be utilized also when using VS type monitor. On client side, Open Remote Desktop Connection and input parameters. Set Start a program as shown in Fig. 3.7.-5. A070503 Fig. 3.7.-5 SYS 600 Monitor Remote Connection Mons.exe program is started with parameter –start_as_logon_user and –default.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 4. Upgrading from earlier revisions This chapter describes upgrading information related to the base system, communication system and LIB 500 system. Previous and current program packages available for MicroSCADA usage are shown in Table.4.-1. Table 4.-1 Previous and current program packages available for usage SYS revision Base LIB revision Application library revision SYS 600 LIB 500 4.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual * * The configuration file templates SYS_BASCON$COM, SYS_BASCON.HSB, SYS_CONFIG$PAR and SHUTDOWN$CIN should be merged to the corresponding old application files SYS_BASCON.COM, SYS_CONFIG.PAR and SHUTDOWN.CIN to enable new features introduced in newer revisions. The configuration files are described in the System Configuration manual.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual When "844_COMPATIBLE_MIRRORING" is set (in revision 8.4.5, or later), the mirroring works with an 8.4.4 application, and also with a newer application that has specified "844_COMPATIBLE_MIRRORING". However, it does not work with an 8.4.5 or later application without "844_COMPATIBLE_MIRRORING". Using "844_COMPATIBLE_MIRRORING", the upgrading can be done system by system without disturbing the operation of the network.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual DEFAULT_DAYLIGHT_POLICY_IS_CALENDAR In revision 8.4.4, the implementation of time handling was comprehensively rewritten. Both local and UTC time as well as daylight saving time are fully supported. There is a slight incompatibility between the new and old implementation of the scheduling of time channels: The default behaviour of time channels at daylight saving time / standard time transitions has been changed.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual In newer revisions the following rules apply: * * * * A change of a quality attribute generates an event if EE = 1 A change of a quality attribute activates an event channel, a printout and/or history logging if the activation is enabled (AE == 1, LD <> 0 or HE == 1) and the activation criterion (AA, PA or HA) is "NEW VALUE" or "UPDATE".
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 4.1.6. Upgrading from revision 8.4.0 SETTING_LA_AND_AG_DOES_NOT_ALARM In revision 8.4.0 and earlier, setting AG or LA attribute of a process object did not affect the alarm state of the object and no post-processing was done. Since revision 8.4.1, the alarm state is updated according to the new value and normal postprocessing is done.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual When "ON_COMMAND_EXPANSION" is set, the expansion of macros is done as in revision 8.1, that is, before the line is interpreted. 4.2. LIB 5xx Language translation When LIB 5xx is updated there might be new attributes in language text files. This means that those attributes has to be added and translated to corresponding localized language files.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 4.3. Monitor Pro 4.3.1. Common applications with LIB 5xx SYS 600 revision 9.2 contains the User Management, Calendar and Login Dialog integrated from LIB 500 to SYS 600. By default, the user name and password are requested for the applications. If the application has not been previously prepared for the LIB 500 User Management, then the first operator who logs into application will be the System Manager.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual @Start_Dialog_Tag = "Main" ;Needed if Start_Object_Type == "Dialog" @Start_Dialog_Type = "VS_Main_Dialog" ;Needed if Start_Object_Type == "Dialog" @Start_Dialog_Attributes= vector("Default_Path=""Sys_Tool""", "Notify_Parent_On_Exit = false","Delete_Parent_On_Exit=true") Filters In SYS 600 9.2 the Event and Alarm List filters must be in predefined directory, whereas in 9.0 and 9.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual Starting MicroSCADA Pro without preparation for Power Process Library If MicroSCADA is wanted to run without Power Process Library do the following actions after version 9.2 is installed and before starting MicroSCADA. 1. Comment SYS_600 specific part from the file \sc\sys\active\sys_\sys_bascon. com 2. Comment SYS_600 specific part from the file \sc\Stool\Misc\Apl_Stl.txt 3. Rename file \sc\sa_lib\base\bbone\inst\INDEX5_B1.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual Table 4.-1 Previous and current program packages available for usage (Continued) PO value Protocol 25 Modbus RTU master protocol 26 IEC 1107 protocol If the DCP-MUX to be upgraded contains a protocol which is not listed here, the upgrading is not possible as such. In this situation, please contact SA-D SupportLine for more information. 4.4.1. PC-NET The main issue in the development tasks made to pc_nets.
MicroSCADA Pro SYS 600 9.2 1MRS756115 Installation and Administration Manual 4.4.1.2. PC-NET from SYS 500 8.4.x If the previous version is SYS 500 8.4.5 SP1, SYS 500 8.4.4 SP4, SYS 600 9.0, COM 500 4.0 SP1 or older, following upgrade notification must be taken into account: * After the upgrade, each instance of PC-NET will allocate 16 Megabytes of memory. PC-NET instance in versions SYS 500 8.4.4 SP1, COM 500 4.0 (without service packs) and older allocated 4 Megabytes of memory. In versions COM 500 4.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 4.4.1.3. PC-NET from SYS 500 8.x If the needed protocols can be found from the list presented in Section 4.4. Communication units, the upgrading of the DCP-MUX unit to PC-NET should be possible. The DCP-MUX card is replaced with a multi-port serial card having sufficient amount of COM-ports. The connected RS232-devices like modems can usually be used as such.
SYS 600 9.2 MicroSCADA Pro 1MRS756115 Installation and Administration Manual 4.4.3. Modbus slave Modbus slave is a separate executable used in systems with COM500i. The same backward compatibility approach is also used with modbus slave . The modifications made to modbus_slave.exe has been minor and upgrading to a newer version should not cause problems. 4.4.4. CDC-II slave CDC-II slave is also a separate executable used in systems with COM500i.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual PQ = 16,- ;Number of parallel queues/ Needed in COM 500 Applications QD = (1,1,0,0,0,0,1,1,1,1,1,1,1,1,1,1),- ;Parallel queue dedication/ Needed in COM 500 Applications If any project specific modifications have been made to the command procedures of the previous COM 500 revision, the modifications must be copied to the matching new command procedures.
SYS 600 9.2 MicroSCADA Pro Installation and Administration Manual Advantech site: http://www.advantech.com Meinberg site: http://www.meinberg.de DHelectrnics: http://www.xlon.
1MRS756115 MicroSCADA Pro SYS 600 9.2 Installation and Administration Manual 5.
1MRS756115 EN 10/2007 ABB Oy Substation Automation Products P.O. Box 699 FI-65101 Vaasa FINLAND Tel. +358 10 2211 Fax. +358 10 224 1094 www.abb.
