User Manual

• 12 – Read error.
• 13 – Read timeout error.
• 14 – Write error.
• 15 – Turbo error.
• 16 – Illegal channel index.
• 17 – Illegal gain index.
• 18 – Illegal AI command.
• 19 – Illegal AO command.
• 20 – Bits out of range.
• 21 – Illegal number of channels.
• 22 – Illegal scan rate.
• 23 – Illegal number of samples.
• 24 – AI response error.
• 25 – LabJack RAM checksum error.
• 26 – AI sequence error.
• 27 – Maximum number of streams.
• 28 – AI stream start error.
• 29 – PC buffer overflow.
• 30 – LabJack buffer overflow.
• 31 – Stream read timeout.
• 32 – Illegal number of scans.
• 33 – No stream was found.
• 40 – Illegal input.
• 41 – Echo error.
• 42 – Data echo error.
• 43 – Response error.
• 48 – Caps error.
• 49 – Caps error.
• 50 – Caps error.
• 51 – HID number caps error.
• 52 – HID get attributes warning.
• 57 – Wrong firmware version error.
• 64 – Could not claim all LabJacks.
• 65 – Error releasing all LabJacks.
• 66 – Could not claim LabJack.
• 67 – Error releasing LabJack.
• 68 – Claimed abandoned LabJack.
• 69 – Local ID –1 thread stopped.
• 70 – Stop thread timeout.
• 71 – Thread termination failed.
• 72 – Feature handle creation error.
If bit 8 is set, the error occurred in the stream thread. Bit 10 is set for Windows API errors.