Specifications

5.4
Replacing
the Incident
6V 30W
Halogen Lamp
A="oaitolr ]
nr-wavs DrscoNNEcr
youR
EeurpMENT BEFoRE
DorNG
ANy REpArR.
Do not
install
any bulb
in
your
instrument
other
than ones
designated by
Meiji
Techno:
For
All Integrated
llluminators MT9200,
MT9300, MT9420 &
MT9430
l
@
HOTI
i
LAMe
AND
LAMe HousrNG MAy BE
Hor
ro roucH.
o
Switch off the
microscope.
o
Disconnect
the
power
cord.
o
Wait
until
the housing
and bulb
have
cooled
sufficiently.
.
Loosen
the clamp screw
and direct the backing
plate
so
it
can
be
removed
from the
housing.
o
Remove
the
defective
lamp.
o
Place
a
new
lamp into
the
socket while avoiding
touching
the
glass.
Notice the
bulb
is wrapped in
plastic.
Use
the
bag
to avoid
touching
the
glass
envelope during
instalfation.
o
Be
sure the
bulb
is
pushed
in
as
far
as
possible
thereby
assuring
the
alignment of
the filament in the
illuminator.
o
Reinstall
the
lamp
cover
door.
o
Reconnect
the
power
cord and switch
on
the
microscope
to align
the filament
and
to
verify
proper
illuminator
operation.
Loosen the
clamp
screw
=7
26