Instruction manual

Meiji Techno products are manufactured in Japan under ISO9000 manufacturing
standards. However, if you ever have any difficulty with any Meiji product, feel
free to contact us at:
Meiji Techno America
3010 Olcott St
Santa Clara, CA 95054
800.832.0060
408.970.4799 FAX
[e-mail]
http://www.meijitechno.com
Our technical staff is trained to assist you on mechanical or electrical issues you
may have.
Problems in regard to specimens, fluorochrome fluorescence, specimen
preparation, specimen staining, etc. are beyond the scope of this manual.
5.1 Fluorescence Lamp does not work
LAMPHOUSE MAY BE HOT TO THE TOUCH.
Do not touch the glass envelope of the lamp at any time. Keep the protective
sleeve or bag of the lamp during installation and remove it right after installation.
• Make sure that all cable connections between the lamp house, power unit
and mains are all properly established.
• Check if the lamp house power unit main fuse is intact.
• Check the logged hours of the lamp for an excess of 200 hours.
5.2 Replacing the Fluorescence Lamp