Instruction manual

The system should be operated in a room with as little dust as practically
possible. Keep the power supply and lamphouse away from solvents, chemical
fumes and excessive humidity. Also try to avoid big swings in ambient
temperature, direct sunlight and excessive vibration.
The power supply needs adequate room around the housing to receive airflow.
The power supply should have at least 10cm space away from the nearest wall
or obstruction.
Operating Ambient Conditions
Temperature: 0 - 40°C (32 – 96.8°F)
Relative Humidity: 20 – 80% up to 30°C (No dew condensation allowed)
2.2 Unpacking
Please check your packing slip to insure that all materials are present.
Keep a copy for your records so that you have the proper information when
ordering more equipment, ordering replacement parts or accessories or when
calling for technical support.
Please make sure that no small pieces or parts are left in the packing material.
Keep the packing materials in a safe place for the purpose of storage and
transporting the microscope and its accessories.
Avoid touching the surface of optical components such as
lenses, filters and glass surfaces.
Even very small traces of perspiration or finger oils can corrode the surfaces of
optics in a short period of time.