Users Manual
22
22
<!$
5(#/&
2$0+(*!!$#"7"8.
0.2$!!!3%7+"8!<$$"
.!!!,"1.!!("
"$$B!$0<!$!
$A$$$!$$!$!
$2$$$#$!#
*%
The SLM756 module supports the LCD display of the MIPI interface with an identification signal for the compatible
screen. The resolution of the screen can be up to 1280*720. The signal interface is shown in the following table. In
the Layout, the MIPI signal line should strictly control the differential 100 ohm impedance and the equal length
between the signal line group and the group.
The module's MIPI interface is a 1.2V power domain. When the user needs a compatible screen design, the module's
GPIO or ADC pin can be used. At the same time, the module can provide 2.8V power to the LCD. The LCD interface is
as follows:
2#&(G%
Name
Pin
Input/Output
Description
LCD_RST
117
O
LCM Reset Pin
MIPI_DSI0_CLK_N
119
O
MIPI Clock Line
MIPI_DSI0_CLK_P
120
O
MIPI_DSI0_LANE0_N 121
I/O
MIPI Data Line
MIPI_DSI0_LANE0_P 122
I/O
MIPI_DSI0_LANE1_N 123
I/O
MIPI_DSI0_LANE1_P 124
I/O
MIPI_DSI0_LANE2_N 125
I/O
0HL*KDUGZDUHGHVLJQJXLGH