User manual

~ 7 ~
Front Panel — Receiving Unit CV-57G[Rx]
HDMI OUT: Connect to a HDMI display with a HDMI male-male cable here.
Signal Level: Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level varies
from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible range to short
distance. Please adjust the signal level from 7 to 0 and stop turning the rotary switch whenever the
audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would
shorten the product life significantly!
Rear Panel — Receiving Unit CV-57G[Rx]
HDMI Signal IN: Plug in a Cat-5/5e/6 cable that needs to be linked to the RJ-45 connector of the transmitting unit
CV-57G[Tx].
+5V DC: Connect to 5V DC power supply.