User manual

~ 2 ~

The CV-57G HDMI 1.3 over Single CAT5 Extender boosts up your video/audio transmission distance up to

60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36

bit color depth. With only one cost effective LAN cable, users can readily extend HDTV sources from DVD players,

Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to distant display monitors

including HDMI/DVI enabled TV sets or LCD PC monitors. With the state-of-the-art Silicon Image chipsets

equipped, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports and compatibility are all further

insured. This flexibility makes HDCP compliant DVD players or PS3 transmit utmost high quality video and audio

with a greater distance at the minimal cost, when integrating several components apart.

The CV-57G includes two units: transmitting (CV-57G[Tx]) and receiving (CV-57G[Rx]) units. The

transmitting unit is used to capture the input HDMI/DVI signals and carry the signals through one RJ-45

connector into one cost effective Cat-5/5e/6 cable. The receiving unit is responsible for equalizing the transmitted

HDMI signal. The transmission distance between the sending and receiving units can be up to 60m (200ft) under

HD (720p/1080i) or 40m (130ft) under Full HD (1080p). With an 8-level equalization rotary control on the

receiving unit, users can adjust the equalization strength to the received HDMI signals accordingly, and therefore

optimize the transmission distance between source and destination.

ntroduction