CV-57G HDMI 1.
Safety and Notice The CV-57G HDMI 1.3 over Single CAT5 Extender has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the CV-57G should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. z Follow all instructions and warnings marked on this unit.
Introduction The CV-57G HDMI 1.3 over Single CAT5 Extender boosts up your video/audio transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36 bit color depth. With only one cost effective LAN cable, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to distant display monitors including HDMI/DVI enabled TV sets or LCD PC monitors.
Features z State-of-the-art Silicon Image (founder of HDMI) chipset embedded for upmost compatibility and reliability z HDMI 1.
Specifications & Package Contents Model Name Technical Role of usage HDMI compliance HDCP compliance Video bandwidth Video support HDMI over UTP transmission [24-bit] Audio support Signal Equalization Input TMDS signal Input DDC signal ESD protection PCB stack-up Input Output HDMI source control IR remote control HDMI connector RJ-45 connector 3.
Panel Description Front Panel — Transmitting Unit CV-57G[Tx] HDMI IN: Connects to a HDMI source with a HDMI male-male cable here MODE: 0 = [Video] – supports up to HDMI 1.3 output. [Audio] – supports up to 7.1ch output 1 = [Video] – supports up to HDMI 1.3 output. [Audio] – locks to stereo audio output 2 = [Video] – locks to HDMI 1.2 output. [Audio] – supports up to 7.1ch output 3 = [Video] – locks to HDMI 1.2 output. [Audio] – locks to stereo audio output 4 = [Video] – DVI display mode.
Step 2 – Please turn the rotary arrow clockwise [] from Mode 6 to Mode 1. If you can get audio/video from the display, you can stay tune at this setting for 1080p and stereo audio. If you need to get 1080p with 7.1ch audio output, please turn the rotary arrow counterclockwise [ ] from Mode 1 to Mode 0. If you cannot get the audio/video out normally, please go on the next step. Step 3 – Please turn the rotary arrow counterclockwise [ ] from Mode 0/1 to Mode 7.
Front Panel — Receiving Unit CV-57G[Rx] HDMI OUT: Connect to a HDMI display with a HDMI male-male cable here. Signal Level: Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance. Please adjust the signal level from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally.
Hardware Installation 1. Connect a HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit CV-57G[Tx]. 2. Connect a HDMI or DVI display (such as a LCD TV) to the receiving unit CV-57G[Rx]. 3. Connect a Cat-5/5e/6 cable between the transmitting and receiving units. 4. Make sure this Cat-5/5e/6 cable is tightly connected and not loose. 5. Plug in 5V DC power supply unit to the power jack of the receiving unit CV-57G[Rx]. 6.
Pin Definition HDMI Pin 1 TMDS Data2+ Pin 8 TMDS Data0 Shield Pin 15 SCL Pin 2 TMDS Data2 Shield Pin 9 TMDS Data0– Pin 16 SDA Pin 3 TMDS Data2– Pin 10 TMDS Clock+ Pin 17 DDC/CEC Ground Pin 4 TMDS Data1+ Pin 11 TMDS Clock Shield Pin 18 +5 V Power Pin 5 TMDS Data1 Shield Pin 12 TMDS Clock– Pin 19 Hot Plug Detect Pin 6 TMDS Data1– Pin 13 CEC Pin 7 TMDS Data0+ Pin 14 Reserved (N.C.
Notice 1. When adjusting the signal level on the receiver unit, please dial the rotary control switch from 7 to 0 and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would shorten the product life significantly! 2. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI or HDMI display EDID information. 3.
Limited Warranty The SELLER warrants the CV-57G HDMI 1.3 over Single CAT5 Extender to be free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surge.
