SDS

G178, Perfect Clarity Coating (25-63C) 09/10/14
__________________________________________________________________________________________
Page 6 of 15
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
General Physical Form:
Liquid
Odor, Color, Grade:
lime clear
Odor threshold
No Data Available
pH
Not Applicable
Melting point
No Data Available
Boiling Point
Not Applicable
Flash Point
42.1 ºF
Evaporation rate
No Data Available
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
No Data Available
Flammable Limits(UEL)
No Data Available
Vapor Pressure
No Data Available
Vapor Density
No Data Available
Density
0.78 - 0.86 g/cm3
Specific Gravity
0.78 - 0.86 g/cm3
Solubility In Water
No Data Available
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
No Data Available
Viscosity
No Data Available
Hazardous Air Pollutants
0 % weight [Test Method: Calculated]
Volatile Organic Compounds
28.8 % weight [Test Method: calculated per CARB title 2]
Volatile Organic Compounds
252 g/l [Test Method: calculated SCAQMD rule 443.1]
Volatile Organic Compounds
2.11 lb/gal [Test Method: calculated SCAQMD rule 443.1]
Volatile Organic Compounds
529 g/l [Details: Directive 2004/42/EC]
Percent volatile
64.5 % weight [Test Method: Estimated]
Percent volatile
No Data Available
VOC Less H2O & Exempt Solvents
394 g/l [Test Method: calculated SCAQMD rule 443.1]
VOC Less H2O & Exempt Solvents
3.29 lb/gal [Test Method: calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
None known.