SDS

Meguiar's G200416 Hybrid Ceramic Liquid Wax
09/03/19
Page 4 of
9
Skin/hand protection
Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the
results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the
substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective
clothing.
Gloves made from the following material(s) are recommended: Nitrile Rubber
Respiratory protection
None required.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
Physical state
Color
Liquid
Off-White
Odor Sweet Odor, Pleasant Odor
Odor threshold No Data Available
pH 8.8 - 9.5
Melting point Not Applicable
Boiling Point 212 ºF
Flash Point >= 200 ºF [Test Method:Pensky-Martens Closed Cup]
Evaporation rate No Data Available
Flammability (solid, gas) Not Applicable
Flammable Limits(LEL) No Data Available
Flammable Limits(UEL) No Data Available
Vapor Pressure No Data Available
Vapor Density No Data Available
Density 0.9 - 1 g/cm3
Specific Gravity 0.9 - 1 [Ref Std:WATER=1]
Solubility in Water Moderate
Solubility- non-water No Data Available
Partition coefficient: n-octanol/ water No Data Available
Autoignition temperature No Data Available
Decomposition temperature No Data Available
Viscosity 6,500 centipoise - 8,500 centipoise
Molecular weight No Data Available
Volatile Organic Compounds 10.1 %
Percent volatile 93 % weight [Test Method:Estimated]
VOC Less H2O & Exempt Solvents 625 g/l
SECTION 10: Stability and reactivity
10.1. Reactivity
This material is considered to be non reactive under normal use conditions.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
None known.