SDS

G1910, Meguiar's 3 in 1 Wax’ (30-6A) 09/13/18
__________________________________________________________________________________________
Page 5 of 9
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
General Physical Form:
Liquid
Odor, Color, Grade:
Sweet Tangerine, Off-White, Viscous Liquid
Odor threshold
No Data Available
pH
8 - 9
Melting point
No Data Available
Boiling Point
212 ºF
Flash Point
>=200 ºF [Test Method:Estimated]
Evaporation rate
No Data Available
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
No Data Available
Flammable Limits(UEL)
No Data Available
Vapor Pressure
No Data Available
Vapor Density
No Data Available
Density
0.99 - 1.01 g/cm3 [Ref Std:WATER=1]
Specific Gravity
0.99 - 1.01 [Ref Std:WATER=1]
Solubility In Water
No Data Available
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
No Data Available
Viscosity
14,000 - 24,000 centipoise [Test Method:Brookfield]
[Details:Brookfield #5 @10rpm]
Average particle size
No Data Available
Bulk density
No Data Available
Hazardous Air Pollutants
0.00299 lb HAPS/lb solids
Molecular weight
No Data Available
Volatile Organic Compounds
13.7 % weight [Test Method:calculated per CARB title 2]
Percent volatile
84.2 % weight [Test Method:Estimated]
Softening point
No Data Available
VOC Less H2O & Exempt Solvents
583 g/l [Test Method:calculated SCAQMD rule 443.1]
* The values noted with an asterisk (*) in the above table are representative values based on testing of raw materials and selected products.
Additionally, a material's characteristics may change depending upon the process and conditions of use at a facility, including further
changes in particle size, or mixture with other materials. In order to obtain specific data for the material, we recommend the user conduct
characterization testing based on the use factors at the specific facility.
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
None known.