SDS

G1903, Ultimate Tire Shine (31-19B): G190315
07/17/18
Page 5 of
10
clothing. Note: Nitrile gloves may be worn over polymer laminate gloves to improve dexterity.
Gloves made from the following material(s) are recommended: Polymer laminate
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part
of a full respiratory protection program. Based on the results of the exposure assessment, select from the following
respirator type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates
Half facepiece or full facepiece supplied-air respirator
Organic vapor respirators may have short service life.
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
General Physical Form: Liquid
Specific Physical Form: Aerosol
Odor, Color, Grade: Slight Chemical Odor, Clear, Liquid Aerosol
Odor threshold No Data Available
pH No Data Available
Melting point No Data Available
Boiling Point No Data Available
Flash Point 20 ºF [Test Method:Estimated]
Evaporation rate No Data Available
Flammability (solid, gas) Not Applicable
Flammable Limits(LEL) No Data Available
Flammable Limits(UEL) No Data Available
Vapor Pressure No Data Available
Vapor Density No Data Available
Density 0.78 g/cm3
Specific Gravity 0.78 [Ref Std:WATER=1]
Solubility In Water No Data Available
Solubility- non-water No Data Available
Partition coefficient: n-octanol/ water No Data Available
Autoignition temperature No Data Available
Decomposition temperature No Data Available
Viscosity 50 centipoise
Average particle size No Data Available
Bulk density No Data Available
Hazardous Air Pollutants No Data Available
Molecular weight No Data Available
Volatile Organic Compounds 22.6 % weight [Test Method:calculated per CARB title 2]
Volatile Organic Compounds 178 g/l [Test Method:calculated SCAQMD rule 443.1]
Percent volatile 62.3 % weight [Test Method:Estimated]
Softening point No Data Available
VOC Less H2O & Exempt Solvents 275 g/l [Test Method:calculated SCAQMD rule 443.1]
* The values noted with an asterisk (*) in the above table are representative values based on testing of raw materials and selected products.
Additionally, a material's characteristics may change depending upon the process and conditions of use at a facility, including further
changes in particle size, or mixture with other materials. In order to obtain specific data for the material, we recommend the user conduct
characterization testing based on the use factors at the specific facility.