SDS

G187, Reflective Tire Dressing (27-152A) 09/17/15
__________________________________________________________________________________________
Page 12 of 13
Incinerate in a permitted waste incineration facility. Facility must be capable of handling aerosol cans. As a disposal
alternative, utilize an acceptable permitted waste disposal facility. Empty drums/barrels/containers used for transporting and
handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable
regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable
waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal
facilities.
SECTION 14: Transport Information
DOTG:
LIMITED QUANTITY
DOTW:
UN1950, AEROSOLS, 2.1, LIMITED QUANTITY
IATA:
UN 1950, AEROSOLS, FLAMMABLE, 2.1
IMO:
UN 1950, AEROSOLS, FLAMMABLE, 2.1, LIMITED QUANTITY
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this material.
SECTION 15: Regulatory information
15.1. US Federal Regulations
Contact manufacturer for more information
311/312 Hazard Categories:
Fire Hazard - Yes Pressure Hazard - Yes Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - No
15.2. State Regulations
Contact manufacturer for more information
15.3. Chemical InventoriesThe components of this product are in compliance with the chemical notification
requirements of TSCA.
Contact manufacturer for more information
15.4. International Regulations
Contact manufacturer for more information
This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: Other information
NFPA Hazard Classification
Health: 2 Flammability: 4 Instability: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address
the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar
emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include
the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.