SDS

G136, Quik Interior Detailer™ (25-147A): G13600, G13616 03/20/15
__________________________________________________________________________________________
Page 4 of 8
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part
of a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
General Physical Form:
Liquid
Odor, Color, Grade:
Slight flowery fragrance; Clear, water-like liquid
Odor threshold
No Data Available
pH
7 - 8
Melting point
Not Applicable
Boiling Point
212 ºF
Flash Point
Flash point > 93 °C (200 °F)
Evaporation rate
No Data Available
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
Not Applicable
Flammable Limits(UEL)
Not Applicable
Vapor Pressure
No Data Available
Vapor Density
No Data Available
Density
0.99 g/cm3
Specific Gravity
0.94 - 1.04 [Ref Std: WATER=1]
Solubility in Water
Complete
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
Not Applicable
Decomposition temperature
No Data Available
Viscosity
No Data Available
Hazardous Air Pollutants
1.77 lb HAPS/lb solids [Test Method: Calculated]
Hazardous Air Pollutants
01.888E-07 lb HAPS/gal [Test Method: Calculated]
Volatile Organic Compounds
0.20 % weight
VOC Less H2O & Exempt Solvents
No Data Available
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.