Datasheet

SALES OFFICE
Megger Limited
Archcliffe Road Dover
CT17 9EN England
T [phone]
E [e-mail]
EVCA_DS_en_V05
www.megger.com
ISO 9001
The word ‘Megger’ is a registered trademark
ORDERING INFORMATION
Description Part number
EVCA210-UK (UK Mains Socket) 1012-732
Included accessories
Type 1 to Type 2 Charging Plug Adaptor
Fixed Type 2 Charging Plug
EVCA210 Carry Case
Instruction Manual
Description Part number
EVCA210 (Schuko Mains Socket) 1013-317
Included accessories
EVCA210
Fixed Type 2 Charging Plug
Soft Carry Case
Instruction Manual
Optional accessories for EVCA210 & EVCA210-UK
EVCA210 Soft Carry Case 1013-318
Type 1 to Type 2 Plug Adaptor 1014-901
EVCA210-CH EV adaptor 1013-832
EVCA210-AU EV adaptor 1015-141
EVCA210/EVCA210-UK
Electric vehicle charge-point adaptor
SPECIFICATIONS
Input voltage Up to 250 V (single phase system) / up to
430 V (three phase system)
Input Frequency 50/60 Hz,
PE Pre-Test Yes – Push button
CP Error “E” simulation Push button
PP Simulation NC, 13 A, 20 A, 32 A, 63 A
CP States A, B, C, D
CP Error “E” Yes
PE Error (Earth fault) Yes
Measuring Ports Max. 250/430 V, CAT II 300 V, max. 10 A
L1, L2, L3, N and PE
Mains socket Max. 250 V, CAT II 300 V, max. 10 A,
Note: Do not load mains socket
simultaneously with measuring ports!
CP Signal Test Ports Approx. +/-12 V, CAT 0
(under normal condition)
Measurement category CAT II 300 V
Altitude above sea level. 2000 m max.
Dimensions (W × H × L) 225 mm x 145 mm x 62 mm
(without connection
cable and test cable)
Weight Approx: 780g
CE directive Low Voltage Directive LVD 2014/35/EU
Safety IEC/EN 61010-1:2010
IEC/EN 61010-2-030:2010
Working temperature range 0 to +40 °C
Storage temperature range -10 to +50 °C
Reference humidity range 10 to 60% relative humidity w/o
condensation
Working humidity range 10 to 85% relative humidity w/o
condensation