Operation Manual

Page 19 of 19
Battery
Battery Replacement
 Switch off the instrument
 Disconnect the instrument from
any electrical circuits
 Undo two screws
 Remove the battery cover from
the base.
 For battery replacement:
a) Remove old batteries
b) Refit new batteries following
correct polarity as marked on
the battery holder
c) Replace the battery cover
d) Tighten Screws
e) Do not mix old and new
batteries
Incorrect battery cell polarity can cause
electrolyte leakage, resulting in damage
to the instrument.
1 - Disconnect
Leads
2 - Undo Screws x 2
3 - Lift off battery cover