Instructions

IDV GmbH | Birkenweiherstraße 2 | D-63505 Langenselbold | Germany | www.megatron-licht.eu
GB
Correct disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possi-
ble harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where
the product was purchased. They can take this product for environmental safe recycling.
INSTALLATION:
1. Mounting information:
• This luminaire is a class II luminaire and can only be used with 220-240V, 50/60Hz power supply.
• A distance of min. 60 cm has to be maintained between the luminaire and the water supply and/or the sink.
• Do not mount the luminaire over the cooking plate/area.
• Keep steam, dripping water and other liquids away from the luminaire.
2. Mounting:
3. Extension possibilities:
2.
Identify the preferred mounting location for the lumi-
naire before installation. Pay attention to the power
supply cable length for correct placement (6cm).
2.
Screw the supplied mounting clips to the marked
locations.
OFF
ON
1.
5.
3. 4.
Insert the supply cable and affix the luminaire into
the mounting clips. Connect the luminaire to the
mains.
If you connect several lights together, they will
be switched individually.
LED
25mm
Max.
20m length
3
2
1
The luminaires can be extended linearly or
through the corner connection power patch
cord MT77229 (A). To extend the luminaires
you have to remove the blind plug (B) from
the female connector side.
(A)
(B)
MEGATRON
®
LED Under Cabinet Luminaire – PINOLIGHT
Instruction Manual
Article No. Wattage (W) Lenght (mm) Luminaire (pcs)
MT77222 4 313 Max. 60
MT77223
7,5 573
Max. 35
MT77224 9,5 873 Max. 22
MT77225 13 1173 Max. 17