Manual
MEGATRON
®
LED-Construction Light – HELFA DUO
TECHNICAL SPECIFICATION
Instruction manual
Series name
MEGATRON
® 
Pro HELFA DUO
Model number MT69054
Wattage 2 x 40W
HPF >0,9
Voltage 220-240V~
Frequency 50/60Hz
Luminous Flux 2 x 4.500 Lumen (System)/2 x 5.600 Lumen (Chip)
Color Temperature 5.000 K
Color Rendering Index CRI Ra 97
IP Rating IP54
Impact resistance rating IK08
Power cable 5m H07RN-F3 rubber cable with safety plug
Color Red/Black
Material Plastic (PC+ABS) + Aluminium
Excellently suitable for: 
- Renovation work
- Construction sites
- Paintwork
Working light with a lot of lumens and high color rendering (Ra97)!
•  Foldable construction light for optimal illumination of rooms and work areas.
•  Super-bright, neutral white and evenly radiating light (2x 4.500 lumens).
•  DUO light head with two LED units that can be individually aligned and switched on
(4.500 lumen each)!
•  Power socket (IP54) for additional lights or for electrical appliances
(max. load 3.580W).
•  Stable, height-adjustable stand made of metal.
•  Set up and ready to use in seconds.
•  Five meter long rubber cable H07RN-F3 with safety plug.
•  The integrated cable winder also serves as a handle.
•  Including practical protective bag for easy transport.
•  Suitable for indoor and protected outdoor use.
•  Instant restart possible.
•  The operating temperature of the luminaire is -25�– +45�C.
INSTRUCTIONS FOR USE:
•  Place the light on a stable and dry surface.
•  Open the lower clamp lock to set up the base. Then lock the clamp lock again!
•  Now open the upper clamp lock to adjust the height of the LED light. Then lock the clamp lock again!
•  Insert the power plug into a suitable socket with protective contact. If you use the product outdoors, the power plug 
may only be inserted into a corresponding IPX4 socket.
•  Now switch on the construction light using the ON/OFF switches.
----
1,0m
© 01/2021
Replace any broken 
Protective disk
CAUTIONS:
•  Read the entire manual carefully before installation and operation.
•  Switch OFF the power source before installation, replacement and cleaning!
•  DO NOT disassemble the inner part of the luminaire. Doing so may result in luminaire damage or malfunction.
•  Before replacement of the luminaire, turn it off and allow it to cool down.
•  The minimum safety distance from the illuminated object is 1,0m.
•  The manufacturer accepts no liability for any damage resulting from the misuse of the luminaire or when it is used 
with inappropriate equipment.
•  The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire 
shall be replaced.
•  Consult your dealer if you have any enquiries.
Lieferumfang:
Including Protective bag


