Manual
CAUTIONS
LED Wall Luminaire-WING+
approx. 11mm
220-240V AC
IP54
4,5W
MT68002
WING+
50Hz
E
250lm
500lm
220-240V AC
IP54
4,5W
MT68003
WING+
50Hz
E
250lm
500lm
Model Number
Series Name
Wattage
Voltage
Lumen Containing Product
Lumen Light Source
Frequency
IP Rating
Light source energy
efficiency class <X>
•
DO NOT cover luminaire when in use.
•
The driver contained in this luminaire shall only be replaced by a qualified electrician, and must be in compliance with the local installation regulations.
Before replacement of the luminaire, turn it off and allow it cool down. Heat-resistant gloves are mandatory when handling the luminaire.
Wearing gloves during installation is recommended to ensure the luminaire is kept in the best condition.
Switch off the power source before installation, replacement and cleaning!
Read the entire manual carefully before installation and operation.
•
•
•
•
•
•
•
Installation or replacement should be performed only by licensed and qualified electricians.
Important warning when drilling in walls: Before drilling, make sure that there are no gas, water or power lines at the drilling site.
Installation only by competent persons. Be sure to pay attention to the wall condition, as the attached mounting material is not suitable for all wall types suitable.
Inquire at retailers about the screws and dowels suitable for the respective wall condition. The manufacturer accepts no liability for any resulting damages from
improper wall dowel.
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
This product contains a light source of energy efficiency class <E >
• Consult your dealer if you have any enquiries.
DO NOT disassemble the inner part of the luminaire. Doing so may result in lamp damage or malfunction.
The manufacturer accepts no liability for any damage resulting from the misuse of the luminaire or from when is it used with inappropriate equipment.

