Specifications

INSTALLATION AND OPERATION
Plug the Power Supply Adapter into the mains
outlet and connect it to the MPP101 printer as
shown on Figure 4.
Make sure the temperature is within the
0 - 40°C range!
The batteries are charged 80% in 1.5 hours and
completely in 3h.
It is highly recommended to avoid
printing, while charging the batteries!
Turning the Printer On and Off
The printer is turned on by pressing the
Multifunctional Button and turns automatically
off if hasn’t been used for more than a minute.
Self Test
A self test is performed by double pressing
quickly the Multifunctional Button.
LED Indication
LED status Description
Off Printer Off
Blinking Red Batteries need recharging
Blinking Red and
Green Together
Connection in progress
Lit Red Paper Out
Blinking Green
(Duty 10%)
Printer On / Charge Finished
Blinking Green
(Duty 80%)
Fast Charge in progress
Blinking Green
(Duty 40%)
Fast Charge finished;
Trickle Charge in progress
MPP101 User Manual 11