Specifications

LST: List device output to
1. TTY: The full-duplex serial port
2.
CRT: Memory mapped crt
3. LPT: The Centronics parallel printer port
4.
UL1: The simplex serial port
ENTER -
List device end-of-line to next-line delay
Maximum of 255 NULLS
Enter 'X, if the above is not required
ENTER -
Some printers require that there be a delay between sending a carriage return character to the
printer and the transmission of the next printable character. The number of "null" characters
(=00 hex) sent after a carriage return can be specified here.
Simplex Serial Port baud rate
1. 9600 baud
2. 7200 baud
3. 4800 baud
4. 3600 baud
5. 2400 baud
6. 1800 baud
7. 1200 baud
ENTER -
The response to this CJ.Iery determines the baud rate initialized for the Simplex Serial Port
when the system is booted.
Full
duplex serial port baud rate
1. 9600 baud
2. 7200 baud
3. 4800 baud
4. 3600 baud
5. 2400 baud
6. 1800 baud
7. 1200 baud
8. 600 baud
9. 300 baud
10. 150 baud
11. 134.5 baud
12. 110 baud
13. 75 baud
14. 50 baud
ENTER -
The response to this query determines the baud rate initialized for the Full-duplex Serial Port
when the system is booted.
Video display terminal emulation mode.
1. Alphanumeric mode
2. Graphic mode
ENTER -
The response to this CJ.Iery wil L determine whether the ALphanumeric Mode or the Graphi cs Mode of
the
Video Display Interface is used to display the CRT alphanumeric data. Note that the
Megatel Computer Technologies Toronto, Canada
Page S/W-19