Specifications

The first procedure invoked by QINSTAL~SUB will display the following message:
SYSTEM INSTALLATION PROGRAM Version 2.23
Please select option
A, B, or C to enter the CP/M
system's configuration for your MEGATEL QUARK.
When you have completed the configurations, select
option D to continue with the installation
procedure or select option X to abort. If option
D
is selected, all user input will be saved in
QSYS.DAT, and will be used as defaults for the
next installation run.
A -
DISK DRIVE HARDWARE SPECIFICATIONS
B - DISKETTE FORMAT SPECIFICATIONS
C - OTHER PERIPHERALS CONFIGURATION
D - CONTINUE THE INSTALLATION PROCEDURE
X - ABORT PROCEDURE
ENTER -
Each of the above menu selections is described in the sections which follow.
Selection "AU - Disk drive hardware specifications
When A is chosen, the following queries will appear on the screen and must be answered:
SELECT DRIVE UNIT TO BE DEFINED
1. Drive 0 on SEL 0
2. Drive 1 on SEL 1
3. Drive 2 on SEL 2
4. Drive 3
on SEL 3
5.
Return to main menu
Enter -
DRIVE UNIT 0 SPECIFICATIONS
Define drive to be the same as
1. Drive 0
2. Drive 1
3. Drive 2
4. Drive 3
5. To be defined
Enter -
Type of drive
1. 5 1-4 inch floppy disk
2. 8
inch floppy disk
ENTER -
Number of Tracks Per Inch
1. 96 TPI
2. 48 TPI
Enter -
Megatel Computer Technologies Toronto, Canada
Page S/W-13