User`s manual

2
Power Source
Check the power specification plate on the back of the Pico Projector.
Ensure that your line voltage matches with the power adapter rating
of the Pico Projector. The Power Adaptor accepts AC power 100-240V,
50-60 Hz.
Power Adaptor
Use only the power adaptor supplied with the Pico Projector. Do
not use the power adaptor if it has become damaged or frayed. For
a replacement power adaptor, contact your authorized dealer.
Do not allow anything to rest on the power adaptor. Do not place
this projector where the adaptor may be abused by persons walking
on it.
Overloading
Do not overload wall outlets and extension cords as this can result
in the risk of fire or electric shock.
Liquid Spills
Do not set drinks or other liquids on top of the Pico Projector.
Do not place the Pico Projector near water, for example, near a
bathtub, washbowl, kitchen, sink, or laundry tub, in a wet basement,
or near a swimming pool. Spilled liquids can flow inside the Pico
Projector and cause damage.
Repair
Do not disassemble the Pico Projector. Take it to an authorized
technical staff when service or repair work is required.
Technical Service
Please refer servicing to authorized technical staff under the
following conditions:
1. When the power adaptor or plug is damaged or frayed.
2. If liquid has been spilled into the Pico Projector.
3. If the Pico Projector has been exposed to rain or water.
4. If the Pico Projector does not operate normally by following
the operating instructions.
5. If the Pico Projector has been dropped or the cabinet has been
damaged.
6. If the Pico Projector exhibits a distinct change in performance.