User`s manual

13
bag or use the original packing carton to minimize shock and impact.
Store and transport the Pico Projector at temperature between 0
and 140 degrees Fahrenheit (-17 to 60 degrees Centigrade). Avoid
storage in automobiles during seasonal temperature extremes.
Automobile interior temperatures can exceed 160 degree Fahrenheit
(70 degrees Centigrade) in summer. If the Pico Projector has been
exposed to extremely hot, cold or humid conditions, allow it to
stand at room temperature for 30 minutes before use. Extended use
of the Pico in high temperature environments may cause a reduction
in brightness of the projected image.
Chapter 5
Troubleshooting Guide
If you are having a problem operating the Pico Projector, first
make sure you have set it up according to the instructions in Chapter
3. You should also check the adjustments and the INPUT connections.
Verify that all power is switched on. Before calling for service,
check the troubleshooting suggestions in this chapter.
Problem Solutions
The Mouse Cursor does not move: Battery remaining power too low
There is no sound from speaker: Check that the AV cable is connected
into the AV connectors on the rear
panel.
Abnormal image color and flicker: Recharge battery or use AC-DC
adapter