User`s manual

8
2.5 Connecting to External Sources
1. Power up the Pico Projector.
2. Bring up the MODE SELECT window.
3. (a) Computer : Plug the 15pin VGA connector to the computer and
the connector on the other end of the cable to the Pico AV/VGA
input. Set computer output options (resolution : 800x600 or
1024x768, output : mirror, extended or external). In the MODE
SELECT window select the corresponding output options from the
computer, the projected image should be the select output option
of the computer.
(b) CVBS(composite video) : Connect the RCA plugs to the
corresponding outputs of the video source. Select the CVBS option
on the MODE SELECT window. The projected image should be same
as output from the video source.
(c) AUDIO OUT : Connect a self-powered Audio Speaker to the AUDIO
OUT port to enjoy louder sound output. The sound volume can be
adjusted on the WIN CE screen or via the VOLUME CONTROL BUTTON.