Use and Care Guide

14 | USING AND HANDLING | MC-1400
**Please check with the manufacturer of your cookware to
ensure that it is intended for use on an induction cooking
device.
**Be cautious whenever using hollow-walled simmer pots.
Such pots can boil dry unnoticed, which may lead to
damage of the pot and cooktop.
**The maximum permissible weight of the pot plus its content
must not exceed 13.25 lbs./6kgs.
1. Plug the power plug into a suitable outlet.
2. The display will show “L” if the temperature of the cooktop
is below 120°F, and “H” if the temperature exceeds 120°F.
3. Place an induction-compatible pot or pan at the center of
the cooktop.
4. Press ON/STANDBY (8). A beep will indicate that the
appliance is on, and the selection indicator LED lights (2)
will start blinking to indicate that the appliance can now
be set.
Using this mode is recommended whenever steaming food or
boiling water to avoid an overheating error message.
1. Press LEVEL (5) on the control panel. The LED display will show
8 as the default setting and the LEVEL selection indicator
LED light will light up red.
OPERATING INSTRUCTIONS
1. SWITCHING ON
2. LEVEL MODE