User's Manual

Logistic Tray mLog2 User Manual Rev. 1.0 Updated on 29September 2019
Technical Contacts and Enquiry: [e-mail] Website: www.myndar.com
(This user manual / product specification is subjected to be changed without prior notice) P.
14
frequency energy that can be safely absorbed by a user or bystander according to the
intended usage of the product. This product has been tested and found to comply with the
FCC criteria. The LOGISTIC TRAY mLog2 shall be installed & used such that parts of the
user’s body and the hands should be maintained at a comfortable distance of
approximately 25 cm or more.
In some situations or environments, the use of wireless devices may be restricted by the
proprietor of the building or responsible representatives of the organization. These
situations may, for example, include the use of wireless equipment on board airplanes, or
in any other environment where the risk of interference to other devices or services is
perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless equipment in a specific
organization or environment (such as airports), you are encouraged to ask for
authorization to use this device prior to turning on the equipment.
Modifications
The FCC requires the user to be notified that any changes or modifications to this device
that are not expressly approved by the manufacturer may void the user’s authority to
operate the equipment. The correction of interference caused by unauthorized
modification, substitution or attachment will be the responsibility of the user. The
manufacturer and its authorized resellers or distributors are not liable for any damage or
violation of government regulations that may arise from failing to comply with these
guidelines.
Information for Professional Installers
All products must be professionally installed, and the transmit power of the system must
be adjusted by the professional installers to ensure that the system EIRP is in compliance
with the limit specified by the regulatory authority of the country of application.
See the following sections for more information:
Professional installers should select only the antenna types listed in the following table
Frequency Band Antenna Type
902-928MHz RFID NEAR FIELD FLAT PANEL ANTENNA