Setup guide

Mega 200VWR Router
Chapter 2: Installing the router
9
The Front LEDs
LED Meaning
1 PWR Lit when power is ON.
2 SYS Lit when the system is ready.
3 – 6
LAN Port
1X — 4X
(RJ-45 connector)
Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps.
Blinking when data is Transmitted / Received.
7
WLAN
Green when the wireless connection is established.
Flashing when sending/receiving data.
8 – 9
Phone
1X — 2X
(RJ-11 connector)
Green when the phone is off-hook.
10
LINE
Lit when inbound and outbound calls are using the PSTN.
12
VoIP Port
1X — 2X
(RJ-11 connector)
Lit when the SIP Registration is OK.
Green for Phone 1; Orange for Phone 2.
Note: Also orange when both Phone 1 and 2 are registered OK at the
same time.
13 ADSL/PPP
Green when successfully connected to an ADSL DSLAM,
(“line synch”).
Orange when there is a PPPoA / PPPoE connection.