Setup guide

Mega 200VWR Router
Chapter 4: Configuration
48
IPoA Routed Connections
Description: User-definable name for the connection.
VPI/VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through
a single IP account, sharing a single IP address. If users on your LAN have public IP addresses and can
access the Internet directly, the NAT function can be disabled.
IP Assignment
~ Obtain an IP address automatically via DHCP client: This specifies if the router is to get an
IP address from the ISP (Internet Service Provider) automatically.
~ Use the following IP Address: this is to specify the IP address manually; this IP should be
given by your ISP.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specific headers)
that IP will attempt to send through the interface.