Setup guide

Mega 200VWR Router
Chapter 4: Configuration
39
Wireless Client / MAC Address Filter
The MAC Address supports up to 16 wireless network machines and helps you to manage your network
control to accept traffic from specific authorized machines or to restrict unwanted machine(s) from
accessing your LAN.
There are no pre-define MAC Address filter rules; you can add the filter rules that meet your
requirements.
Wireless Client Filter: Default setting is Disable.
~ Allowed: To authorize a specific device accessing your LAN, insert the devises MAC Address in
the space provided, or click
. Make sure your computer’s MAC is listed.
~ Blocked: To prevent unwanted devices from accessing the LAN, insert the MAC Address of
an unwanted computer into the space provided, or click
. Make sure your computer’s
MAC is not listed.
The maximum number of clients is 16. MAC addresses are 6 bytes long; they are presented only in
hexadecimal format. The number 0 - 9 and letters a - f are acceptable. MAC addresses are 6 bytes long
Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included.
Candidates: This function automatically detects devices connected to the router through the Wireless
AP . .
→Associated Wireless Clients
Associate Wireless Client displays a list of individual wireless device’s MAC Address that are currently
connected to the router.
You can easily add a particular client to the Allow or Block list by checking the box next to the MAC