Setup guide

Mega 200VWR Router
Chapter 4: Configuration
33
Ethernet Client Filter
The Ethernet Client Filter supports up to 16 Ethernet network machines and helps you to manage your
network control, accepting traffic from specific authorized machines or restricting unwanted machine(s)
from access your LAN.
There are no pre-define Ethernet MAC address filter rules; you can add the filter rules that meet your
requirements.
Ethernet Client Filter: Default setting is Disable.
~ Allowed: check to authorize a specific device to access your LAN by insert the MAC Address in
the space provided or click
. Make sure your PC’s MAC is listed.
~ Blocked: To prevent unwanted device accessing your LAN, insert the MAC Address in the
space provided or click
. Make sure your PC’s MAC is not listed.
The maximum number of clients is 16. The MAC addresses are 6 bytes long; they should be
presented only in hexadecimal characters. The number 0 - 9 and letters a - f are acceptable.
Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included.
Candidates: automatically detects devices connected to the router through the Ethernet. .
→ Active PC in LAN