Setup guide

Mega 200VWR Router
Appendix A: Product Support and Contact Information
169
9 Please also re-insert your ISP details in the top two fields
(username and password). This is needed to complete the
save action successfully.
a. Click the “Setup VoIP accounts” button. The Mega 200VWR Management
utility will again open (see figure below).
b. Insert the Telkom Internet Communicator VoIP account details you received
per e-mail into the spaces provided – indicated by the arrows above. If you
have only registered for & received one VoIP account, it is recommended to
use the Phone port 1 fields. (More VoIP accounts can be obtained from the
Telkom VoIP website, but please be aware that the Mega 200VWR can only
accommodate two VoIP accounts at a time.
c. Click the “Save” button. Your VoIP account and ISP account details will be
saved to the router. On successful completion of the process, a message will
be displayed. Click ‘Ok’ to close the confirmation message then close the utility
by clicking the standard close button (Top-right on the form) returning you to
the menu screen.
9 Before you continue, make sure that you do not have any
active software firewalls running. These include programs
like: Norton Internet Security, TrendMicro’s PC-Cillin,
Bit-Defender, McAfee, etc. Please disable these
programs temporarily to perform the next step. It is also
important to remember to re-activate your software
firewall after you have completed this step.
Important
Information