Setup guide

Mega 200VWR Router
Chapter 4: Configuration
153
Spaces next to VPI and VCI, type 0 and 33 in respectively. Select appropriate ATM Class, Encapsulation
Method, Acceptable Frame Type, Filter Type and PVID for Untagged Frames.
VPI and VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
Encapsulation method: Select the encapsulation format, this is provided by your ISP.
Acceptable Frame Type: Specify what kind of traffic can use this connection, all traffic or only VLAN
tagged.
Filter Type: Specify the type of ethernet filtering performed by the named bridge interface.
All
Allows all types of ethernet packets through the port.
Ip Allows only IP/ARP types of ethernet packets through the port.
Pppoe Allows only PPPoE types of ethernet packets through the port.
PVID for Untagged Frames: Port VLAN Identifier is known as PVID. When an untagged packet is
received by input port(s), this packet will be tagged with specified PVID.
From the example, only the VPI and VCI section need to be filled-in, just leave the rest as is. Repeat the
same procedure by clicking Create Æ select RFC1483 Bridged Æ fill-in the rest of PVC 0/34 to 0/39.