Setup guide

Mega 200VWR Router
Chapter 4: Configuration
151
IGMP
IGMP, known as Internet Group Management Protocol, is used to management hosts from multicast
group.
IGMP Forwarding: Accepting multicast packet. Default is Enable.
IGMP Snooping: Allowing switched Ethernet to check and make correct forwarding decisions. Default
is Disable.
VLAN Bridge
This section allows you to create VLAN group and specify the members.
Edit: Edit your member ports in selected VLAN group.
Create VLAN: To create another VLAN group.
Advanced VLAN Setup Example (Triple Play)
VLAN_data:
Ethernet Port 1, Wireless and Wireless WDS are reserving for Internet
- On Ethernet port 1, VC 0/40 bridged mode is also required.
VLAN_Video
Ethernet ports: 2, 3 and 4:
- 0/33 Bi-directional IP
- 0/34 Video
- 0/35 Video
- 0/36 Video Subscriber Services (EPG, EAS, etc.)
- 0/37 Video
- 0/38 Video
- 0/39 Spare
Step 1: Setup Member Ports
Go to Configuration Æ LAN Æ Bridge Interface.
You can setup member ports for each VLAN group under Bridge Interface section. From the example, two