Setup guide

Mega 200VWR Router
Chapter 4: Configuration
148
Device Management
The Device Management configuration settings allow you to control your router’s security options and
device monitoring features.
Embedded Web Server ( 2 Management IP Accounts)
HTTP Port: This is the port number of the router’s embedded web server. (for web-based configuration)
The default value is the standard HTTP port, 80. Users may specify an alternative if, for example, they are
running a web server on a PC within their LAN.
Management IP Address: You may specify the IP addresses allowed to logon and access the router’s
web server. Setting the IP address to 0.0.0.0 will disable IP address restrictions, allowing users to login
from any IP address.
Expire to auto-logout: Specify a time frame for the system to auto-logout the user’s configuration
session.
For Example: User A changes the routers HTTP port number to 100, specifies their own IP address
of10.0.0.55, and sets the logout time to be 100 seconds. The router will only allow User A access from
the IP address 10.0.0.55 to logon to the Web GUI by typing: http://10.0.0.2:100
in their web browser. After