Setup guide

Mega 200VWR Router
Chapter 4: Configuration
140
Edit One-to-One NAT (Network Address Translation)
One-to-One NAT maps a specific private/local (LAN) IP address to a particular global/public (WAN) IP
address.
If you have multiple public/WAN IP addresses provided by your ISP, you are will be able to use the
One-to-One NAT function to utilize these IP addresses.
NAT Type: Select the desired NAT type. By default, the One-to-One NAT function is disabled.
Global IP Address:
~ Subnet: The subnet of the public/WAN IP addresses given by your ISP. If your ISP has
provided this information, you may insert it here. Otherwise, use the IP Range method to define
your addresses.
~ IP Range: The IP address range of your public/WAN IP addresses. For example, IP:
192.168.1.1, end IP: 192.168.1.10
Select the Apply button to apply your changes.
Click on
to create a new One-to-One NAT rule: