Setup guide

Mega 200VWR Router
Chapter 4: Configuration
139
Edit DMZ Host
A DMZ Host is a computer on the LAN that is completely exposed to the Internet. When you have
configured a particular internal IP address as the DMZ Host, all incoming packets will be checked by the
routers firewall and NAT algorithms, and if the packet does not use a port number that has been assigned
by any Virtual Server entry, it will be passed to the DMZ host
Cautious: This local computer, which is exposed to the Internet, may face a variety of security risks.you should
make quite sure that it is adequately protected.
~ Disabled: This option disables the DMZ function and is the default setting.
~ Enabled: this option enables the DMZ function.
Internal IP Address: When the DMZ function is enabled, supply the static IP address of the DMZ Host.
Be aware that this IP will be exposed to the WAN/Internet.
List all Computers currently connected to the network. You may assign a Compouter using
its IP address and/or its MAC address from this list.
Select the Apply button to apply your changes.