Setup guide

Mega 200VWR Router

Chapter 3: Basic Installation

Connecting Your Router

1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone (ADSL) network.

2. Power on the device.

3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit.

4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set.

5. Connect RJ-11 cable to LINE Port when connecting to the telephone wall jack.

Connect more

computers

Analog Phone

ADSL

filter

ADSL Phone

Line

Switching/

HUB