Setup guide

Mega 200VWR Router

Chapter 4: Configuration

129

QoS - Quality of Service

The QoS function helps you to control your network traffic for each LAN (Ethernet and/or Wireless)

application that accesses the WAN (Internet). It allows you to control the quality and speed of

throughput for each application, when the system is running with a fully loaded upstream channel.

Here are the items within the QoS section: Prioritization and Outbound / Inbound IP Throttling

(bandwidth management).

Prioritization

There are three priority settings provided in the Router:

~ High

~ Normal (Normal priority is the default for all traffic without any setting)

~ Low

The ratio of utilization for each priority are: High (60%), Normal (30%) and Low (10%).

Application: A user-defined description identifying this new policy/application.

Time Schedule: The details of when this rule of your prioritization policy is active .

Priority: The priority given to this policy/application. The default setting is High; you may adjust this

setting to fit your requirements.

Protocol: The name of the supported protocol.

Source Port: The source port of packets to be monitored.

Destination Port: The destination port of packets to be monitored.

Click Clear

You can click Clear to delete the existin

lication.