Setup guide

Mega 200VWR Router
Chapter 4: Configuration
127
Ring & Tone
This section allows advanced users to change the parameters for the various phone tones.
(dialtone, busy tone, answer tone and etc.)The default settings are the same as the South
African PSTN, but advanced users are welcome to customize these values to suit their
requirements.
Country Specific Ring & Tone
Region: Select the country where you are located from the drop-down list,. This VoIP router provides
default parameter of ring tones according to different countries. The ring-tone parameters are
automatically displayed after entering a specific country. If your country is not in the list, or you wish to
have a customised ring tone, you may manually create ring-tone parameters.
Ring Parameters
Ring Cadence (in ms): Ring cadence is defined by the following fields, Frequency: On Time1, Off Time1,
On Time2, Off Time2 and On Time3, Off Time3. Frequency is specified in Hertz. Time is given in
milliseconds.
Tone Parameters
You may need to check with your local telephone service provider for such information. Also, it is
recommended that this option be configured by an advanced user only , unless you are instructed to do
so.
Click Apply to apply the settings.