Setup guide

Mega 200VWR Router
Chapter 4: Configuration
113
Display Name: This is what will be displayed on a Caller ID system.
General Settings
This section contains the basic settings for the VoIP module from the selected provider in the Wizard
section. If you do not provide correct information here, you will be unable to make calls over the
Internet.
SIP Device Parameters
SIP: Select whether you wish to use SIP as VoIP call signaling protocol. The default setting is Disable.
Silence Suppression (VAD): Voice Activation Detection (VAD) prevents the transmission of silence
since it will unnecessarily consume your bandwidth. This function is also known as Silence Suppression,
and it is a software application that ensures the bandwidth is used only when voice activity is activated.
The default setting is Enable.
Echo Cancellation: G.168 echo cancellation is an ITU-T standard. It is used for iremoving the echo while
you are on the phone. If it is enabled, this will mean that you will not hear too much of your own voice on
the phone while you talk. The default setting is Enable.
RTP Port: Provide the base value for the media (RTP) ports. These ports are assigned to various